[PATCH v3 1/2] ASoC: max98927: Handle reset gpio when probing i2c

[Andy Shevchenko]

On Fri, Sep 3, 2021 at 4:51 AM Alejandro <atafalla at dnyon.com> wrote:
>
> From: Alejandro Tafalla <atafalla at dnyon.com>
>
> Drive the reset gpio if defined in the DTS node.

...

> +       reset_gpio
> +               = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_LOW);
> +       if (IS_ERR(reset_gpio)) {
> +               ret = PTR_ERR(reset_gpio);
> +               return dev_err_probe(&i2c->dev, ret, "failed to request GPIO reset pin");

Not sure why my comments have been ignored here.

> +       }

--
With Best Regards,
Andy Shevchenko