[PATCH 1/2] sound: 6fire: fix control and bulk message timeouts

[Johan Hovold]

USB control and bulk message timeouts are specified in milliseconds and
should specifically not vary with CONFIG_HZ.

Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB")
Cc: stable at vger.kernel.org      # 2.6.39
Signed-off-by: Johan Hovold <johan at kernel.org>
---
 sound/usb/6fire/comm.c     | 2 +-
 sound/usb/6fire/firmware.c | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/usb/6fire/comm.c b/sound/usb/6fire/comm.c
index 43a2a62d66f7..49629d4bb327 100644
--- a/sound/usb/6fire/comm.c
+++ b/sound/usb/6fire/comm.c
@@ -95,7 +95,7 @@ static int usb6fire_comm_send_buffer(u8 *buffer, struct usb_device *dev)
 	int actual_len;
 
 	ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP),
-			buffer, buffer[1] + 2, &actual_len, HZ);
+			buffer, buffer[1] + 2, &actual_len, 1000);
 	if (ret < 0)
 		return ret;
 	else if (actual_len != buffer[1] + 2)
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c
index 8981e61f2da4..c51abc54d2f8 100644
--- a/sound/usb/6fire/firmware.c
+++ b/sound/usb/6fire/firmware.c
@@ -160,7 +160,7 @@ static int usb6fire_fw_ezusb_write(struct usb_device *device,
 {
 	return usb_control_msg_send(device, 0, type,
 				    USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				    value, 0, data, len, HZ, GFP_KERNEL);
+				    value, 0, data, len, 1000, GFP_KERNEL);
 }
 
 static int usb6fire_fw_ezusb_read(struct usb_device *device,
@@ -168,7 +168,7 @@ static int usb6fire_fw_ezusb_read(struct usb_device *device,
 {
 	return usb_control_msg_recv(device, 0, type,
 				    USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				    value, 0, data, len, HZ, GFP_KERNEL);
+				    value, 0, data, len, 1000, GFP_KERNEL);
 }
 
 static int usb6fire_fw_fpga_write(struct usb_device *device,
@@ -178,7 +178,7 @@ static int usb6fire_fw_fpga_write(struct usb_device *device,
 	int ret;
 
 	ret = usb_bulk_msg(device, usb_sndbulkpipe(device, FPGA_EP), data, len,
-			&actual_len, HZ);
+			&actual_len, 1000);
 	if (ret < 0)
 		return ret;
 	else if (actual_len != len)
-- 
2.32.0