[PATCH v5 11/16] ASoC: audio-graph-card2-custom-sample.dtsi: add Sample DT for Normal (Single)

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

Audio Graph Card2 settings is a little bit difficult for beginner,
and Customizing it also difficult/confusable too.
So, this patch adds sample for it.

You can easily use it by adding below line on your DT file,
and select CONFIGs to your .config.

	#include "../../../../../sound/soc/generic/audio-graph-card2-custom-sample.dtsi"

	CONFIG_SND_AUDIO_GRAPH_CARD2
	CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE
	CONFIG_SND_TEST_COMPONENT

This patch uses audio-graph-card2 base custom sample driver.
You can directly use audio-graph-card2 instead of custom sample driver
by modifing compatible.

	- compatible = "audio-graph-card2-custom-sample";
	+ compatible = "audio-graph-card2";

Sample custom driver will indicate customized print.

It is using Test-Component driver for CPU/Codec.
It can indicate more detail print of each behavior if user want to.
In such case, you need to update compatible to "xxx-nv" or "xxx-vv".

	- compatible = "test-cpu";
	+ compatible = "test-cpu-verbose";

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
 .../audio-graph-card2-custom-sample.dtsi      | 71 +++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 sound/soc/generic/audio-graph-card2-custom-sample.dtsi

diff --git a/sound/soc/generic/audio-graph-card2-custom-sample.dtsi b/sound/soc/generic/audio-graph-card2-custom-sample.dtsi
new file mode 100644
index 000000000000..c2511da31530
--- /dev/null
+++ b/sound/soc/generic/audio-graph-card2-custom-sample.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * audio-graph-card2-custom-sample.dtsi
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ * Copyright (C) 2020 Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
+ *
+ * This sample indicates how to use audio-graph-card2 and its
+ * custom driver. "audio-graph-card2-custom-sample" is the custome driver
+ * which is using audio-graph-card2.
+ *
+ * You can easily use this sample by adding below line on your DT file,
+ * and add new CONFIG to your .config.
+ *
+ *	#include "../../../../../sound/soc/generic/audio-graph-card2-custom-sample.dtsi"
+ *
+ *	CONFIG_SND_AUDIO_GRAPH_CARD2
+ *	CONFIG_SND_AUDIO_GRAPH_CARD2_CUSTOM_SAMPLE
+ *	CONFIG_SND_TEST_COMPONENT
+ */
+/ {
+	/*
+	 * @ : used at links
+	 *
+	 * [Normal]
+	 *	cpu0 <- at -----------------> codec0
+	 */
+	audio-graph-card2-custom-sample {
+		/*
+		 * You can use audio-graph-card2 directly by using
+		 *
+		 * compatible = "audio-graph-card2";
+		 */
+		compatible = "audio-graph-card2-custom-sample";
+
+		links = <&cpu0			/* normal: cpu side only */
+		>;
+	};
+
+	test_cpu {
+		/*
+		 * update compatible to indicate more detail behaviour
+		 * if you want. see test-compatible for more detail.
+		 *
+		 * ex)
+		 *	- compatible = "test-cpu";
+		 *	+ compatible = "test-cpu-verbose";
+		 */
+		compatible = "test-cpu";
+		ports {
+			bitclock-master;
+			frame-master;
+			cpu0: port at 0 { cpu0_ep: endpoint { remote-endpoint = <&codec0_ep>; }; };
+		};
+	};
+
+	test_codec {
+		/*
+		 * update compatible to indicate more detail behaviour
+		 * if you want. see test-compatible for more detail.
+		 *
+		 * ex)
+		 *	- compatible = "test-codec";
+		 *	+ compatible = "test-codec-verbose";
+		 */
+		compatible = "test-codec";
+		ports {
+			port at 0  { codec0_ep:  endpoint { remote-endpoint = <&cpu0_ep>; }; };
+		};
+	};
+};
-- 
2.25.1