[PATCH] ASoC: qcom: soundwire: Enable soundwire bus clock for version 1.6

[Bjorn Andersson]

On Fri 01 Oct 09:24 PDT 2021, Srinivasa Rao Mandadapu wrote:

> Add support for soundwire 1.6 version to gate RX/TX bus clock.
> 
> Signed-off-by: Venkata Prasad Potturu <potturu at codeaurora.org>
> Signed-off-by: Srinivasa Rao Mandadapu <srivasam at codeaurora.org>
> ---
>  drivers/soundwire/qcom.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index 0ef79d6..599b3ed 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -127,6 +127,7 @@ struct qcom_swrm_ctrl {
>  	struct device *dev;
>  	struct regmap *regmap;
>  	void __iomem *mmio;
> +	char __iomem *swrm_hctl_reg;
>  	struct completion broadcast;
>  	struct completion enumeration;
>  	struct work_struct slave_work;
> @@ -610,6 +611,12 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
>  	val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index);
>  	val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index);
>  
> +	if (ctrl->swrm_hctl_reg) {
> +		val = ioread32(ctrl->swrm_hctl_reg);
> +		val &= 0xFFFFFFFD;

That's a tricky way of saying:

	val &= ~BIT(1);

That said, naming bit 1 is still a very good thing.

> +		iowrite32(val, ctrl->swrm_hctl_reg);
> +	}
> +
>  	ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val);
>  
>  	/* Enable Auto enumeration */
> @@ -1200,7 +1207,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
>  	struct qcom_swrm_ctrl *ctrl;
>  	const struct qcom_swrm_data *data;
>  	int ret;
> -	u32 val;
> +	int val, swrm_hctl_reg = 0;
>  
>  	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
>  	if (!ctrl)
> @@ -1251,6 +1258,9 @@ static int qcom_swrm_probe(struct platform_device *pdev)
>  	ctrl->bus.port_ops = &qcom_swrm_port_ops;
>  	ctrl->bus.compute_params = &qcom_swrm_compute_params;
>  
> +	if (!of_property_read_u32(dev->of_node, "qcom,swrm-hctl-reg", &swrm_hctl_reg))
> +		ctrl->swrm_hctl_reg = devm_ioremap(&pdev->dev, swrm_hctl_reg, 0x4);

Nack.

You may not pull an address to a single register out of an undocumented
DT property and blindly ioremap that.

And you surely should check for errors here, to avoid magical errors
caused by this ioremap failing and your bit not being cleared.

Thanks,
Bjorn

> +
>  	ret = qcom_swrm_get_port_config(ctrl);
>  	if (ret)
>  		goto err_clk;
> -- 
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>