[PATCH 2/2] ASoC: rt5651: Use IRQF_NO_AUTOEN when requesting the IRQ

[Hans de Goede]

Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.

This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 sound/soc/codecs/rt5651.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c
index fc0c83b73f09..93820561b9f5 100644
--- a/sound/soc/codecs/rt5651.c
+++ b/sound/soc/codecs/rt5651.c
@@ -2261,11 +2261,8 @@ static int rt5651_i2c_probe(struct i2c_client *i2c,
 
 	ret = devm_request_irq(&i2c->dev, rt5651->irq, rt5651_irq,
 			       IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
-			       | IRQF_ONESHOT, "rt5651", rt5651);
-	if (ret == 0) {
-		/* Gets re-enabled by rt5651_set_jack() */
-		disable_irq(rt5651->irq);
-	} else {
+			       | IRQF_ONESHOT | IRQF_NO_AUTOEN, "rt5651", rt5651);
+	if (ret) {
 		dev_warn(&i2c->dev, "Failed to reguest IRQ %d: %d\n",
 			 rt5651->irq, ret);
 		rt5651->irq = -ENXIO;
-- 
2.31.1