[PATCH 1/2] ASoC: es8316: Use IRQF_NO_AUTOEN when requesting the IRQ

[Hans de Goede]

Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.

This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 sound/soc/codecs/es8316.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c
index 067757d1d70a..5fb02635c140 100644
--- a/sound/soc/codecs/es8316.c
+++ b/sound/soc/codecs/es8316.c
@@ -811,12 +811,9 @@ static int es8316_i2c_probe(struct i2c_client *i2c_client,
 	mutex_init(&es8316->lock);
 
 	ret = devm_request_threaded_irq(dev, es8316->irq, NULL, es8316_irq,
-					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN,
 					"es8316", es8316);
-	if (ret == 0) {
-		/* Gets re-enabled by es8316_set_jack() */
-		disable_irq(es8316->irq);
-	} else {
+	if (ret) {
 		dev_warn(dev, "Failed to get IRQ %d: %d\n", es8316->irq, ret);
 		es8316->irq = -ENXIO;
 	}
-- 
2.31.1