[RFC PATCH v1 1/1] ASoC: meson: aiu: Fix HDMI codec control selection
Martin Blumenstingl
martin.blumenstingl at googlemail.com
Sun Oct 3 01:43:13 CEST 2021
The HDMI controllers on Amlogic Meson SoCs which use the AIU
audio-controller have two different audio format inputs:
- I2S which is also the only configuration supported on GXBB, GXL and
GXM SoCs since there's no SPDIF support in the DesignWare HDMI
controller driver (at the time of writing this)
- SPDIF can be used optionally, including pass-through formats
Switching between these requires us to set different registers:
AIU_HDMI_CLK_DATA_CTRL[1:0] "HDMI_DATA_CLK_SEL":
- 0x0 disables the HDMI output clock
- 0x1 selects the PCM clock
- 0x2 selects the AIU clock
- 0x3 is reserved
AIU_HDMI_CLK_DATA_CTRL[5:4] "HDMI_DATA_SEL":
- 0x0 outputs constant zero, disables HDMI data
- 0x1 selects PCM data
- 0x2 selects AIU I2S data
- 0x3 is reserved
AIU_CLK_CTRL_MORE[6] "HDMITX_SEL_AOCLKX2":
- 0x0 selects cts_i958 as AIU clk to hdmi_tx_audio_master_clk
- 0x1 selects cts_aoclkx2_int as AIU clk to hdmi_tx_audio_master_clk
The Meson8/8b/8m2 vendor driver uses the following settings:
SPDIF output to the HDMI controller:
- 0x2 (AIU clock) in AIU_HDMI_CLK_DATA_CTRL[1:0]
- 0x0 (no HDMI data) in AIU_HDMI_CLK_DATA_CTRL[5:4]
- 0x0 (using cts_i958 as AIU clk) in AIU_CLK_CTRL_MORE[6]
I2S output to the HDMI controller:
- 0x2 (AIU clock) in AIU_HDMI_CLK_DATA_CTRL[1:0]
- 0x2 (I2S data) in AIU_HDMI_CLK_DATA_CTRL[5:4]
- 0x0 (using cts_aoclkx2_int as AIU clk) in AIU_CLK_CTRL_MORE[6]
The GXBB/GXL/GXM vendor driver uses the following settings:
SPDIF output to the HDMI controller:
- not setting AIU_HDMI_CLK_DATA_CTRL at all
- 0x0 (using cts_i958 as AIU clk) in AIU_CLK_CTRL_MORE[6]
I2S output to the HDMI controller:
- 0x2 (AIU clock) in AIU_HDMI_CLK_DATA_CTRL[1:0]
- 0x2 (I2S data) in AIU_HDMI_CLK_DATA_CTRL[5:4]
- 0x0 (using cts_aoclkx2_int as AIU clk) in AIU_CLK_CTRL_MORE[6]
Set the three registers at the same time following what the vendor
driver does on Meson8/8b/8m2 SoCs. This makes the SPDIF output to the
HDMI controller work. The entries and order of the entries in the enum
is not changed on purpose to not break old configurations.
Fixes: b82b734c0e9a7 ("ASoC: meson: aiu: add hdmi codec control support")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
sound/soc/meson/aiu-codec-ctrl.c | 108 ++++++++++++++++++++++--------
sound/soc/meson/aiu-encoder-i2s.c | 6 --
2 files changed, 80 insertions(+), 34 deletions(-)
diff --git a/sound/soc/meson/aiu-codec-ctrl.c b/sound/soc/meson/aiu-codec-ctrl.c
index c3ea733fce91..2b8575491aeb 100644
--- a/sound/soc/meson/aiu-codec-ctrl.c
+++ b/sound/soc/meson/aiu-codec-ctrl.c
@@ -12,14 +12,60 @@
#include "aiu.h"
#include "meson-codec-glue.h"
-#define CTRL_CLK_SEL GENMASK(1, 0)
-#define CTRL_DATA_SEL_SHIFT 4
-#define CTRL_DATA_SEL (0x3 << CTRL_DATA_SEL_SHIFT)
-
-static const char * const aiu_codec_ctrl_mux_texts[] = {
- "DISABLED", "PCM", "I2S",
+#define AIU_HDMI_CLK_DATA_CTRL_CLK_SEL GENMASK(1, 0)
+#define AIU_HDMI_CLK_DATA_CTRL_CLK_SEL_DISABLE 0x0
+#define AIU_HDMI_CLK_DATA_CTRL_CLK_SEL_PCM 0x1
+#define AIU_HDMI_CLK_DATA_CTRL_CLK_SEL_AIU 0x2
+#define AIU_HDMI_CLK_DATA_CTRL_DATA_SEL GENMASK(5, 4)
+#define AIU_HDMI_CLK_DATA_CTRL_DATA_SEL_OUTPUT_ZERO 0x0
+#define AIU_HDMI_CLK_DATA_CTRL_DATA_SEL_PCM_DATA 0x1
+#define AIU_HDMI_CLK_DATA_CTRL_DATA_SEL_I2S_DATA 0x2
+
+#define AIU_CLK_CTRL_MORE_AMCLK BIT(6)
+
+#define AIU_HDMI_CTRL_MUX_DISABLED 0
+#define AIU_HDMI_CTRL_MUX_PCM 1
+#define AIU_HDMI_CTRL_MUX_I2S 2
+
+static const char * const aiu_codec_hdmi_ctrl_mux_texts[] = {
+ [AIU_HDMI_CTRL_MUX_DISABLED] = "DISABLED",
+ [AIU_HDMI_CTRL_MUX_PCM] = "PCM",
+ [AIU_HDMI_CTRL_MUX_I2S] = "I2S",
};
+static int aiu_codec_ctrl_mux_get_enum(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_kcontrol_component(kcontrol);
+ unsigned int ctrl, more, mux = AIU_HDMI_CTRL_MUX_DISABLED;
+
+ ctrl = snd_soc_component_read(component, AIU_HDMI_CLK_DATA_CTRL);
+ if (FIELD_GET(AIU_HDMI_CLK_DATA_CTRL_CLK_SEL, ctrl) !=
+ AIU_HDMI_CLK_DATA_CTRL_CLK_SEL_AIU) {
+ goto out;
+ }
+
+ more = snd_soc_component_read(component, AIU_CLK_CTRL_MORE);
+ if (FIELD_GET(AIU_HDMI_CLK_DATA_CTRL_DATA_SEL, ctrl) ==
+ AIU_HDMI_CLK_DATA_CTRL_DATA_SEL_I2S_DATA &&
+ !!(more & AIU_CLK_CTRL_MORE_AMCLK)) {
+ mux = AIU_HDMI_CTRL_MUX_I2S;
+ goto out;
+ }
+
+ if (FIELD_GET(AIU_HDMI_CLK_DATA_CTRL_DATA_SEL, ctrl) ==
+ AIU_HDMI_CLK_DATA_CTRL_DATA_SEL_OUTPUT_ZERO &&
+ !(more & AIU_CLK_CTRL_MORE_AMCLK)) {
+ mux = AIU_HDMI_CTRL_MUX_PCM;
+ goto out;
+ }
+
+out:
+ ucontrol->value.enumerated.item[0] = mux;
+ return 0;
+}
+
static int aiu_codec_ctrl_mux_put_enum(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
@@ -28,45 +74,51 @@ static int aiu_codec_ctrl_mux_put_enum(struct snd_kcontrol *kcontrol,
struct snd_soc_dapm_context *dapm =
snd_soc_dapm_kcontrol_dapm(kcontrol);
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
- unsigned int mux, changed;
+ unsigned int mux, ctrl, more;
mux = snd_soc_enum_item_to_val(e, ucontrol->value.enumerated.item[0]);
- changed = snd_soc_component_test_bits(component, e->reg,
- CTRL_DATA_SEL,
- FIELD_PREP(CTRL_DATA_SEL, mux));
- if (!changed)
- return 0;
+ if (mux == AIU_HDMI_CTRL_MUX_I2S) {
+ ctrl = FIELD_PREP(AIU_HDMI_CLK_DATA_CTRL_DATA_SEL,
+ AIU_HDMI_CLK_DATA_CTRL_DATA_SEL_I2S_DATA);
+ more = AIU_CLK_CTRL_MORE_AMCLK;
+ } else {
+ ctrl = FIELD_PREP(AIU_HDMI_CLK_DATA_CTRL_DATA_SEL,
+ AIU_HDMI_CLK_DATA_CTRL_DATA_SEL_OUTPUT_ZERO);
+ more = 0;
+ }
+
+ if (mux == AIU_HDMI_CTRL_MUX_DISABLED) {
+ ctrl |= FIELD_PREP(AIU_HDMI_CLK_DATA_CTRL_CLK_SEL,
+ AIU_HDMI_CLK_DATA_CTRL_CLK_SEL_DISABLE);
+ } else {
+ ctrl |= FIELD_PREP(AIU_HDMI_CLK_DATA_CTRL_CLK_SEL,
+ AIU_HDMI_CLK_DATA_CTRL_CLK_SEL_AIU);
+ }
/* Force disconnect of the mux while updating */
snd_soc_dapm_mux_update_power(dapm, kcontrol, 0, NULL, NULL);
- /* Reset the source first */
- snd_soc_component_update_bits(component, e->reg,
- CTRL_CLK_SEL |
- CTRL_DATA_SEL,
- FIELD_PREP(CTRL_CLK_SEL, 0) |
- FIELD_PREP(CTRL_DATA_SEL, 0));
+ snd_soc_component_update_bits(component, AIU_HDMI_CLK_DATA_CTRL,
+ AIU_HDMI_CLK_DATA_CTRL_CLK_SEL |
+ AIU_HDMI_CLK_DATA_CTRL_DATA_SEL,
+ ctrl);
- /* Set the appropriate source */
- snd_soc_component_update_bits(component, e->reg,
- CTRL_CLK_SEL |
- CTRL_DATA_SEL,
- FIELD_PREP(CTRL_CLK_SEL, mux) |
- FIELD_PREP(CTRL_DATA_SEL, mux));
+ snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE,
+ AIU_CLK_CTRL_MORE_AMCLK,
+ more);
snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
return 0;
}
-static SOC_ENUM_SINGLE_DECL(aiu_hdmi_ctrl_mux_enum, AIU_HDMI_CLK_DATA_CTRL,
- CTRL_DATA_SEL_SHIFT,
- aiu_codec_ctrl_mux_texts);
+static SOC_ENUM_SINGLE_VIRT_DECL(aiu_hdmi_ctrl_mux_enum,
+ aiu_codec_hdmi_ctrl_mux_texts);
static const struct snd_kcontrol_new aiu_hdmi_ctrl_mux =
SOC_DAPM_ENUM_EXT("HDMI Source", aiu_hdmi_ctrl_mux_enum,
- snd_soc_dapm_get_enum_double,
+ aiu_codec_ctrl_mux_get_enum,
aiu_codec_ctrl_mux_put_enum);
static const struct snd_soc_dapm_widget aiu_hdmi_ctrl_widgets[] = {
diff --git a/sound/soc/meson/aiu-encoder-i2s.c b/sound/soc/meson/aiu-encoder-i2s.c
index d6aea7797641..ba3dac987112 100644
--- a/sound/soc/meson/aiu-encoder-i2s.c
+++ b/sound/soc/meson/aiu-encoder-i2s.c
@@ -24,7 +24,6 @@
#define AIU_CLK_CTRL_AOCLK_INVERT BIT(6)
#define AIU_CLK_CTRL_LRCLK_INVERT BIT(7)
#define AIU_CLK_CTRL_LRCLK_SKEW GENMASK(9, 8)
-#define AIU_CLK_CTRL_MORE_HDMI_AMCLK BIT(6)
#define AIU_CLK_CTRL_MORE_I2S_DIV GENMASK(5, 0)
#define AIU_CODEC_DAC_LRCLK_CTRL_DIV GENMASK(11, 0)
@@ -210,11 +209,6 @@ static int aiu_encoder_i2s_set_clocks(struct snd_soc_component *component,
if (ret)
return ret;
- /* Make sure amclk is used for HDMI i2s as well */
- snd_soc_component_update_bits(component, AIU_CLK_CTRL_MORE,
- AIU_CLK_CTRL_MORE_HDMI_AMCLK,
- AIU_CLK_CTRL_MORE_HDMI_AMCLK);
-
return 0;
}
--
2.33.0
More information about the Alsa-devel
mailing list