[PATCH v2 1/4] ASoC: dt-bindings: stm32: i2s: add audio-graph-card port

[Olivier MOYSAN]

Hi Rob,

On 11/25/21 10:26 PM, Rob Herring wrote:
> On Thu, 25 Nov 2021 15:40:50 +0100, Olivier Moysan wrote:
>> The STM2 I2S DAI can be connected via the audio-graph-card.
>> Add port entry into the bindings.
>>
>> Signed-off-by: Olivier Moysan <olivier.moysan at foss.st.com>
>> ---
>>   Documentation/devicetree/bindings/sound/st,stm32-i2s.yaml | 5 +++++
>>   1 file changed, 5 insertions(+)
>>
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/1559750
> 
> 
> audio-controller at 4000b000: 'port' does not match any of the regexes: '^port@[0-9]', 'pinctrl-[0-9]+'
> 	arch/arm/boot/dts/stm32mp157a-dk1.dt.yaml
> 	arch/arm/boot/dts/stm32mp157c-dk2.dt.yaml
> 

This warning is not a new one.

The i2s2 node in stm32mp15xx-dkx.dtsi would require the following binding:
port:
	$ref: audio-graph-port.yaml#
	unevaluatedProperties: false

However the spi binding requires to introduce a unit address:
patternProperties:
   '^port@[0-9]':
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false

The warning can be removed by re-ordering the bindings patches in the 
serie, as "additionalProperties: true" makes the check more tolerant on 
extra properties.
The patch "ASoC: dt-bindings: stm32: i2s: add audio-graph-card port" can 
even be merely dropped.
So, I suggest to resend the serie without audio-graph-card patch.

Does it sound too permissive to you ?

Thanks
Olivier