[PATCH] ASoC: rt1011: revert 'I2S Reference' to SOC_ENUM_EXT

Jack Yu jack.yu at realtek.com
Thu Nov 11 10:17:05 CET 2021


Revert 'I2S Reference' to SOC_ENUM_EXT because the settings are specific
for some platforms, the default setting for 'I2S Reference' does nothing,
only some SoC platform need to configure it.
Previous 'I2S Reference' in SOC_ENUM format only toggles one bit of
RT1011_TDM1_SET_1 register, which isn't enough for specific platform.

Signed-off-by: Jack Yu <jack.yu at realtek.com>
---
 sound/soc/codecs/rt1011.c | 55 ++++++++++++++++++++++++++++++++++-----
 sound/soc/codecs/rt1011.h |  7 +++++
 2 files changed, 56 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index 297af7ff824c..b62301a6281f 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -1311,13 +1311,54 @@ static int rt1011_r0_load_info(struct snd_kcontrol *kcontrol,
 	.put = rt1011_r0_load_mode_put \
 }
 
-static const char * const rt1011_i2s_ref_texts[] = {
-	"Left Channel", "Right Channel"
+static const char * const rt1011_i2s_ref[] = {
+	"None", "Left Channel", "Right Channel"
 };
 
-static SOC_ENUM_SINGLE_DECL(rt1011_i2s_ref_enum,
-			    RT1011_TDM1_SET_1, 7,
-			    rt1011_i2s_ref_texts);
+static SOC_ENUM_SINGLE_DECL(rt1011_i2s_ref_enum, 0, 0,
+	rt1011_i2s_ref);
+
+static int rt1011_i2s_ref_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct rt1011_priv *rt1011 =
+		snd_soc_component_get_drvdata(component);
+
+	rt1011->i2s_ref = ucontrol->value.enumerated.item[0];
+	switch (rt1011->i2s_ref) {
+	case RT1011_I2S_REF_LEFT_CH:
+		regmap_write(rt1011->regmap, RT1011_TDM_TOTAL_SET, 0x0240);
+		regmap_write(rt1011->regmap, RT1011_TDM1_SET_2, 0x8);
+		regmap_write(rt1011->regmap, RT1011_TDM1_SET_1, 0x1022);
+		regmap_write(rt1011->regmap, RT1011_ADCDAT_OUT_SOURCE, 0x4);
+		break;
+	case RT1011_I2S_REF_RIGHT_CH:
+		regmap_write(rt1011->regmap, RT1011_TDM_TOTAL_SET, 0x0240);
+		regmap_write(rt1011->regmap, RT1011_TDM1_SET_2, 0x8);
+		regmap_write(rt1011->regmap, RT1011_TDM1_SET_1, 0x10a2);
+		regmap_write(rt1011->regmap, RT1011_ADCDAT_OUT_SOURCE, 0x4);
+		break;
+	default:
+		dev_info(component->dev, "I2S Reference: Do nothing\n");
+	}
+
+	return 0;
+}
+
+static int rt1011_i2s_ref_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct rt1011_priv *rt1011 =
+		snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.enumerated.item[0] = rt1011->i2s_ref;
+
+	return 0;
+}
 
 static const struct snd_kcontrol_new rt1011_snd_controls[] = {
 	/* I2S Data In Selection */
@@ -1358,7 +1399,8 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = {
 	SOC_SINGLE("R0 Temperature", RT1011_STP_INITIAL_RESISTANCE_TEMP,
 		2, 255, 0),
 	/* I2S Reference */
-	SOC_ENUM("I2S Reference", rt1011_i2s_ref_enum),
+	SOC_ENUM_EXT("I2S Reference", rt1011_i2s_ref_enum,
+		rt1011_i2s_ref_get, rt1011_i2s_ref_put),
 };
 
 static int rt1011_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
@@ -2017,6 +2059,7 @@ static int rt1011_probe(struct snd_soc_component *component)
 
 	schedule_work(&rt1011->cali_work);
 
+	rt1011->i2s_ref = 0;
 	rt1011->bq_drc_params = devm_kcalloc(component->dev,
 		RT1011_ADVMODE_NUM, sizeof(struct rt1011_bq_drc_params *),
 		GFP_KERNEL);
diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h
index 68fadc15fa8c..4d6e7492d99c 100644
--- a/sound/soc/codecs/rt1011.h
+++ b/sound/soc/codecs/rt1011.h
@@ -654,6 +654,12 @@ enum {
 	RT1011_AIFS
 };
 
+enum {
+	RT1011_I2S_REF_NONE,
+	RT1011_I2S_REF_LEFT_CH,
+	RT1011_I2S_REF_RIGHT_CH,
+};
+
 /* BiQual & DRC related settings */
 #define RT1011_BQ_DRC_NUM 128
 struct rt1011_bq_drc_params {
@@ -692,6 +698,7 @@ struct rt1011_priv {
 	unsigned int r0_reg, cali_done;
 	unsigned int r0_calib, temperature_calib;
 	int recv_spk_mode;
+	int i2s_ref;
 };
 
 #endif		/* end of _RT1011_H_ */
-- 
2.33.0



More information about the Alsa-devel mailing list