[PATCH v2] ASoC: qcom: lpass-cpu: Fix pop noise during audio capture begin
Srinivasa Rao Mandadapu
srivasam at codeaurora.org
Thu May 20 16:24:32 CEST 2021
This patch fixes PoP noise of around 15ms observed during audio capture begin.
Enables BCLK and LRCLK in snd_soc_dai_ops prepare call for introducing some delay
before capture start and clock enable.
Signed-off-by: Judy Hsiao <judyhsiao at chromium.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam at codeaurora.org>
---
Changes Since V1:
-- Enableed BCLK and LRCLK in dai ops prepare API instead of startup API
-- Added comments
sound/soc/qcom/lpass-cpu.c | 48 ++++++++++++++++++++++++++++++++++++--
1 file changed, 46 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
index c62d2612e8f5..c5bb3f16d25f 100644
--- a/sound/soc/qcom/lpass-cpu.c
+++ b/sound/soc/qcom/lpass-cpu.c
@@ -93,9 +93,18 @@ static void lpass_cpu_daiops_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
+ struct lpaif_i2sctl *i2sctl = drvdata->i2sctl;
+ unsigned int id = dai->driver->id;
clk_disable_unprepare(drvdata->mi2s_osr_clk[dai->driver->id]);
- clk_unprepare(drvdata->mi2s_bit_clk[dai->driver->id]);
+ /* To ensure BCLK/LRCLK disabled even in device node validation.
+ Will not impact if disabled in trigger suspend */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ regmap_fields_write(i2sctl->spken, id, LPAIF_I2SCTL_SPKEN_DISABLE);
+ else
+ regmap_fields_write(i2sctl->micen, id, LPAIF_I2SCTL_MICEN_DISABLE);
+
+ clk_disable_unprepare(drvdata->mi2s_bit_clk[dai->driver->id]);
}
static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
@@ -275,6 +284,8 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ /* To ensure lpass BCLK/LRCLK is enabled during
+ device resume. Will not impact if enabled in prepare */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
ret = regmap_fields_write(i2sctl->spken, id,
LPAIF_I2SCTL_SPKEN_ENABLE);
@@ -296,6 +307,8 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ /* To ensure lpass BCLK/LRCLK is disabled during
+ device suspend */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
ret = regmap_fields_write(i2sctl->spken, id,
LPAIF_I2SCTL_SPKEN_DISABLE);
@@ -308,19 +321,50 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
ret);
clk_disable(drvdata->mi2s_bit_clk[dai->driver->id]);
-
+ break;
+ default:
break;
}
return ret;
}
+static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct lpass_data *drvdata = snd_soc_dai_get_drvdata(dai);
+ struct lpaif_i2sctl *i2sctl = drvdata->i2sctl;
+ unsigned int id = dai->driver->id;
+ int ret = -EINVAL;
+ /* To ensure lpass BCLK/LRCLK is enabled bit before
+ playback/capture data flow starts */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ ret = regmap_fields_write(i2sctl->spken, id, LPAIF_I2SCTL_SPKEN_ENABLE);
+ else
+ ret = regmap_fields_write(i2sctl->micen, id, LPAIF_I2SCTL_MICEN_ENABLE);
+
+ if (ret)
+ dev_err(dai->dev, "error writing to i2sctl reg: %d\n",
+ ret);
+
+ ret = clk_enable(drvdata->mi2s_bit_clk[id]);
+
+ if (ret) {
+ dev_err(dai->dev, "error in enabling mi2s bit clk: %d\n", ret);
+ clk_disable(drvdata->mi2s_osr_clk[id]);
+ return ret;
+ }
+ return 0;
+}
+
+
const struct snd_soc_dai_ops asoc_qcom_lpass_cpu_dai_ops = {
.set_sysclk = lpass_cpu_daiops_set_sysclk,
.startup = lpass_cpu_daiops_startup,
.shutdown = lpass_cpu_daiops_shutdown,
.hw_params = lpass_cpu_daiops_hw_params,
.trigger = lpass_cpu_daiops_trigger,
+ .prepare = lpass_cpu_daiops_prepare,
};
EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_dai_ops);
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
More information about the Alsa-devel
mailing list