[PATCH v2 2/2] sound: meson: g12a-toacodec: add support for SM1 TOACODEC
Jerome Brunet
jbrunet at baylibre.com
Fri May 7 09:38:52 CEST 2021
On Wed 05 May 2021 at 09:27, Neil Armstrong <narmstrong at baylibre.com> wrote:
> On 05/05/2021 09:26, Neil Armstrong wrote:
>> This adds support for the TOACODEC found in Amlogic SM1 SoCs.
>>
>> The bits are shifted for more selection of clock sources, so this only
>> maps the same support for G12A to the SM1 bits.
>>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>> ---
>> sound/soc/meson/g12a-toacodec.c | 64 ++++++++++++++++++++++++++++++++-
>> 1 file changed, 63 insertions(+), 1 deletion(-)
>>
>> diff --git a/sound/soc/meson/g12a-toacodec.c b/sound/soc/meson/g12a-toacodec.c
>> index 2084c9542c9c..5437ecba9c47 100644
>> --- a/sound/soc/meson/g12a-toacodec.c
>> +++ b/sound/soc/meson/g12a-toacodec.c
>> @@ -21,13 +21,22 @@
>>
>> #define TOACODEC_CTRL0 0x0
>> #define CTRL0_ENABLE_SHIFT 31
>> +#define CTRL0_DAT_SEL_SM1_MSB 19
>> +#define CTRL0_DAT_SEL_SM1_LSB 18
>> #define CTRL0_DAT_SEL_MSB 15
>> #define CTRL0_DAT_SEL_LSB 14
>> +#define CTRL0_LANE_SEL_SM1 16
>> #define CTRL0_LANE_SEL 12
>> +#define CTRL0_LRCLK_SEL_SM1_MSB 14
>> +#define CTRL0_LRCLK_SEL_SM1_LSB 12
>> #define CTRL0_LRCLK_SEL_MSB 9
>> #define CTRL0_LRCLK_SEL_LSB 8
>> +#define CTRL0_LRCLK_INV_SM1 BIT(10)
>> +#define CTRL0_BLK_CAP_INV_SM1 BIT(9)
>> #define CTRL0_BLK_CAP_INV BIT(7)
>> +#define CTRL0_BCLK_O_INV_SM1 BIT(8)
>> #define CTRL0_BCLK_O_INV BIT(6)
>> +#define CTRL0_BCLK_SEL_SM1_MSB 6
>> #define CTRL0_BCLK_SEL_MSB 5
>> #define CTRL0_BCLK_SEL_LSB 4
>> #define CTRL0_MCLK_SEL GENMASK(2, 0)
>> @@ -41,6 +50,7 @@ struct g12a_toacodec {
>> };
>>
>> struct g12a_toacodec_match_data {
>> + const struct snd_soc_component_driver *component_drv;
>> struct reg_field field_dat_sel;
>> struct reg_field field_lrclk_sel;
>> struct reg_field field_bclk_sel;
>> @@ -98,11 +108,20 @@ static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0,
>> CTRL0_DAT_SEL_LSB,
>> g12a_toacodec_mux_texts);
>>
>> +static SOC_ENUM_SINGLE_DECL(sm1_toacodec_mux_enum, TOACODEC_CTRL0,
>> + CTRL0_DAT_SEL_SM1_LSB,
>> + g12a_toacodec_mux_texts);
>> +
>> static const struct snd_kcontrol_new g12a_toacodec_mux =
>> SOC_DAPM_ENUM_EXT("Source", g12a_toacodec_mux_enum,
>> snd_soc_dapm_get_enum_double,
>> g12a_toacodec_mux_put_enum);
>>
>> +static const struct snd_kcontrol_new sm1_toacodec_mux =
>> + SOC_DAPM_ENUM_EXT("Source", sm1_toacodec_mux_enum,
>> + snd_soc_dapm_get_enum_double,
>> + g12a_toacodec_mux_put_enum);
>> +
>> static const struct snd_kcontrol_new g12a_toacodec_out_enable =
>> SOC_DAPM_SINGLE_AUTODISABLE("Switch", TOACODEC_CTRL0,
>> CTRL0_ENABLE_SHIFT, 1, 0);
>> @@ -114,6 +133,13 @@ static const struct snd_soc_dapm_widget g12a_toacodec_widgets[] = {
>> &g12a_toacodec_out_enable),
>> };
>>
>> +static const struct snd_soc_dapm_widget sm1_toacodec_widgets[] = {
>> + SND_SOC_DAPM_MUX("SRC", SND_SOC_NOPM, 0, 0,
>> + &sm1_toacodec_mux),
>> + SND_SOC_DAPM_SWITCH("OUT EN", SND_SOC_NOPM, 0, 0,
>> + &g12a_toacodec_out_enable),
>> +};
>> +
>> static int g12a_toacodec_input_hw_params(struct snd_pcm_substream *substream,
>> struct snd_pcm_hw_params *params,
>> struct snd_soc_dai *dai)
>> @@ -184,6 +210,13 @@ static int g12a_toacodec_component_probe(struct snd_soc_component *c)
>> CTRL0_BLK_CAP_INV);
>> }
>>
>> +static int sm1_toacodec_component_probe(struct snd_soc_component *c)
>> +{
>> + /* Initialize the static clock parameters */
>> + return snd_soc_component_write(c, TOACODEC_CTRL0,
>> + CTRL0_BLK_CAP_INV_SM1);
>> +}
>> +
>> static const struct snd_soc_dapm_route g12a_toacodec_routes[] = {
>> { "SRC", "I2S A", "IN A Playback" },
>> { "SRC", "I2S B", "IN B Playback" },
>> @@ -196,6 +229,10 @@ static const struct snd_kcontrol_new g12a_toacodec_controls[] = {
>> SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL, 3, 0),
>> };
>>
>> +static const struct snd_kcontrol_new sm1_toacodec_controls[] = {
>> + SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 3, 0),
>> +};
>> +
>> static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
>> .probe = g12a_toacodec_component_probe,
>> .controls = g12a_toacodec_controls,
>> @@ -208,6 +245,18 @@ static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
>> .non_legacy_dai_naming = 1,
>> };
>>
>> +static const struct snd_soc_component_driver sm1_toacodec_component_drv = {
>> + .probe = sm1_toacodec_component_probe,
>> + .controls = sm1_toacodec_controls,
>> + .num_controls = ARRAY_SIZE(sm1_toacodec_controls),
>> + .dapm_widgets = sm1_toacodec_widgets,
>> + .num_dapm_widgets = ARRAY_SIZE(sm1_toacodec_widgets),
>> + .dapm_routes = g12a_toacodec_routes,
>> + .num_dapm_routes = ARRAY_SIZE(g12a_toacodec_routes),
>> + .endianness = 1,
>> + .non_legacy_dai_naming = 1,
>> +};
>> +
>> static const struct regmap_config g12a_toacodec_regmap_cfg = {
>> .reg_bits = 32,
>> .val_bits = 32,
>> @@ -215,16 +264,29 @@ static const struct regmap_config g12a_toacodec_regmap_cfg = {
>> };
>>
>> static const struct g12a_toacodec_match_data g12a_toacodec_match_data = {
>> + .component_drv = &g12a_toacodec_component_drv,
>> .field_dat_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_DAT_SEL_LSB, CTRL0_DAT_SEL_MSB),
>> .field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_LRCLK_SEL_LSB, CTRL0_LRCLK_SEL_MSB),
>> .field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_BCLK_SEL_LSB, CTRL0_BCLK_SEL_MSB),
>> };
>>
>> +static const struct g12a_toacodec_match_data sm1_toacodec_match_data = {
>> + .component_drv = &sm1_toacodec_component_drv,
>> + .field_dat_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_DAT_SEL_SM1_LSB, CTRL0_DAT_SEL_SM1_MSB),
>> + .field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_LRCLK_SEL_SM1_LSB,
>> + CTRL0_LRCLK_SEL_SM1_MSB),
>> + .field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_BCLK_SEL_LSB, CTRL0_BCLK_SEL_SM1_MSB),
>> +};
If you make another round, the LSB/MSB defines don't really help
readability here (and in the other patch)
Feel free to put the values directly.
>> +
>> static const struct of_device_id g12a_toacodec_of_match[] = {
>> {
>> .compatible = "amlogic,g12a-toacodec",
>> .data = &g12a_toacodec_match_data,
>> },
>> + {
>> + .compatible = "amlogic,sm1-toacodec",
>> + .data = &sm1_toacodec_match_data,
>> + },
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, g12a_toacodec_of_match);
>> @@ -278,7 +340,7 @@ static int g12a_toacodec_probe(struct platform_device *pdev)
>> return PTR_ERR(priv->field_bclk_sel);
>>
>> return devm_snd_soc_register_component(dev,
>> - &g12a_toacodec_component_drv, g12a_toacodec_dai_drv,
>> + data->component_drv, g12a_toacodec_dai_drv,
>> ARRAY_SIZE(g12a_toacodec_dai_drv));
>> }
>>
>>
>
> Oops, spurious one, please ignore it.
>
> Neil
More information about the Alsa-devel
mailing list