[PATCH 4/4] arm64: dts: rockchip: add rk817 codec to Odroid Go

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

Add the new rk817 codec driver to the Odroid Go Advance.

Tested-by: Maciej Matuszczyk <maccraft123mc at gmail.com>
Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
Changes in v9:
 - Add cover letter.
 - Remove documentation for interrupt parent per Rob Herring's request.
 - Remove unused MODULE_DEVICE_TABLE to fix a bug identified by kernel test
   robot.
Changes in v8:
 - Added additional documentation for missing properties of #sound-dai-cells,
   interrupt-parent, and wakeup-source for mfd documentation.
 - Corrected order of elements descriptions in device tree documentation.
 - Changed name of "mic-in-differential" to "rockchip,mic-in-differential".
 - Changed name of sound card from "rockchip,rk817-codec" to "Analog".
 - Removed unused resets and reset-names from the i2s1_2ch node.
Changes in v7:
 - Removed ifdef around register definitions for MFD.
 - Replaced codec documentation with updates to MFD documentation.
 - Reordered elements in example to comply with upstream rules.
 - Added binding update back for Odroid Go Advance as requested.
 - Submitting patches from gmail now.
Changes in v6:
 - Included additional project maintainers for correct subsystems.
 - Removed unneeded compatible from DT documentation.
 - Removed binding update for Odroid Go Advance (will do in seperate series).
Changes in v5:
 - Move register definitions from rk817_codec.h to main rk808.h register
   definitions.
 - Add volatile register for codec bits.
 - Add default values for codec bits.
 - Removed of_compatible from mtd driver (not necessary).
 - Switched to using parent regmap instead of private regmap for codec.
Changes in v4:
 - Created set_pll() call.
 - Created user visible gain control in mic.
 - Check for return value of clk_prepare_enable().
 - Removed duplicate clk_prepare_enable().
 - Split DT documentation to separate commit.
Changes in v3:
 - Use DAPM macros to set audio path.
 - Updated devicetree binding (as every rk817 has this codec chip).
 - Changed documentation to yaml format.
 - Split MFD changes to separate commit.
Changes in v2:
 - Fixed audio path registers to solve some bugs.

 .../boot/dts/rockchip/rk3326-odroid-go2.dts   | 36 +++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index 49c97f76df77..e8c2b5a817a7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -165,6 +165,31 @@ blue_led: led-0 {
 		};
 	};
 
+	rk817-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Analog";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MICL", "Mic Jack",
+			"Headphones", "HPOL",
+			"Headphones", "HPOR",
+			"Speaker", "SPKO";
+		simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_2ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rk817>;
+		};
+	};
+
 	vccsys: vccsys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v8_sys";
@@ -269,11 +294,14 @@ rk817: pmic at 20 {
 		reg = <0x20>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+		clock-output-names = "rk808-clkout1", "xin32k";
+		clock-names = "mclk";
+		clocks = <&cru SCLK_I2S1_OUT>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>;
+		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
 		wakeup-source;
 		#clock-cells = <1>;
-		clock-output-names = "rk808-clkout1", "xin32k";
+		#sound-dai-cells = <0>;
 
 		vcc1-supply = <&vccsys>;
 		vcc2-supply = <&vccsys>;
@@ -432,6 +460,10 @@ regulator-state-mem {
 				};
 			};
 		};
+
+		rk817_codec: codec {
+			rockchip,mic-in-differential;
+		};
 	};
 };
 
-- 
2.25.1