[PATCH v5 2/9] soundwire: qcom: add support to missing transport params
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Fri Mar 26 07:39:37 CET 2021
Some of the transport parameters derived from device tree
are not fully parsed by the driver.
This patch adds support to parse those missing parameters.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
---
drivers/soundwire/qcom.c | 107 ++++++++++++++++++++++++++++++++++-----
1 file changed, 95 insertions(+), 12 deletions(-)
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 39222b04a2e0..d05e41f68658 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -54,7 +54,13 @@
#define SWRM_MCP_SLV_STATUS 0x1090
#define SWRM_MCP_SLV_STATUS_MASK GENMASK(1, 0)
#define SWRM_DP_PORT_CTRL_BANK(n, m) (0x1124 + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DP_PORT_CTRL_2_BANK(n, m) (0x1128 + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DP_BLOCK_CTRL_1(n) (0x112C + 0x100 * (n - 1))
+#define SWRM_DP_BLOCK_CTRL2_BANK(n, m) (0x1130 + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DP_PORT_HCTRL_BANK(n, m) (0x1134 + 0x100 * (n - 1) + 0x40 * m)
#define SWRM_DP_BLOCK_CTRL3_BANK(n, m) (0x1138 + 0x100 * (n - 1) + 0x40 * m)
+#define SWRM_DIN_DPn_PCM_PORT_CTRL(n) (0x1054 + 0x100 * (n - 1))
+
#define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT 0x18
#define SWRM_DP_PORT_CTRL_OFFSET2_SHFT 0x10
#define SWRM_DP_PORT_CTRL_OFFSET1_SHFT 0x08
@@ -73,12 +79,20 @@
#define QCOM_SDW_MAX_PORTS 14
#define DEFAULT_CLK_FREQ 9600000
#define SWRM_MAX_DAIS 0xF
+#define SWR_INVALID_PARAM 0xFF
+#define SWR_HSTOP_MAX_VAL 0xF
+#define SWR_HSTART_MIN_VAL 0x0
struct qcom_swrm_port_config {
u8 si;
u8 off1;
u8 off2;
u8 bp_mode;
+ u8 hstart;
+ u8 hstop;
+ u8 word_length;
+ u8 blk_group_count;
+ u8 lane_control;
};
struct qcom_swrm_ctrl {
@@ -396,8 +410,11 @@ static int qcom_swrm_port_params(struct sdw_bus *bus,
struct sdw_port_params *p_params,
unsigned int bank)
{
- /* TBD */
- return 0;
+ struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus);
+
+ return ctrl->reg_write(ctrl, SWRM_DP_BLOCK_CTRL_1(p_params->num),
+ p_params->bps - 1);
+
}
static int qcom_swrm_transport_params(struct sdw_bus *bus,
@@ -405,20 +422,45 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus,
enum sdw_reg_bank bank)
{
struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus);
+ struct qcom_swrm_port_config *pcfg;
u32 value;
int reg = SWRM_DP_PORT_CTRL_BANK((params->port_num), bank);
int ret;
- value = params->offset1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT;
- value |= params->offset2 << SWRM_DP_PORT_CTRL_OFFSET2_SHFT;
- value |= params->sample_interval - 1;
+ pcfg = &ctrl->pconfig[params->port_num - 1];
+
+ value = pcfg->off1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT;
+ value |= pcfg->off2 << SWRM_DP_PORT_CTRL_OFFSET2_SHFT;
+ value |= pcfg->si;
ret = ctrl->reg_write(ctrl, reg, value);
- if (!ret && params->blk_pkg_mode) {
- reg = SWRM_DP_BLOCK_CTRL3_BANK(params->port_num, bank);
+ if (pcfg->lane_control != SWR_INVALID_PARAM) {
+ reg = SWRM_DP_PORT_CTRL_2_BANK(params->port_num, bank);
+ value = pcfg->lane_control;
+ ret = ctrl->reg_write(ctrl, reg, value);
+ }
+
+ if (pcfg->blk_group_count != SWR_INVALID_PARAM) {
+ reg = SWRM_DP_BLOCK_CTRL2_BANK(params->port_num, bank);
+ value = pcfg->blk_group_count;
+ ret = ctrl->reg_write(ctrl, reg, value);
+ }
+
+ if (pcfg->hstart != SWR_INVALID_PARAM
+ && pcfg->hstop != SWR_INVALID_PARAM) {
+ reg = SWRM_DP_PORT_HCTRL_BANK(params->port_num, bank);
+ value = (pcfg->hstop << 4) | pcfg->hstart;
+ ret = ctrl->reg_write(ctrl, reg, value);
+ } else {
+ reg = SWRM_DP_PORT_HCTRL_BANK(params->port_num, bank);
+ value = (SWR_HSTOP_MAX_VAL << 4) | SWR_HSTART_MIN_VAL;
+ ret = ctrl->reg_write(ctrl, reg, value);
+ }
- ret = ctrl->reg_write(ctrl, reg, 1);
+ if (pcfg->bp_mode != SWR_INVALID_PARAM) {
+ reg = SWRM_DP_BLOCK_CTRL3_BANK(params->port_num, bank);
+ ret = ctrl->reg_write(ctrl, reg, pcfg->bp_mode);
}
return ret;
@@ -468,10 +510,13 @@ static int qcom_swrm_compute_params(struct sdw_bus *bus)
list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
pcfg = &ctrl->pconfig[p_rt->num - 1];
p_rt->transport_params.port_num = p_rt->num;
- p_rt->transport_params.sample_interval = pcfg->si + 1;
- p_rt->transport_params.offset1 = pcfg->off1;
- p_rt->transport_params.offset2 = pcfg->off2;
- p_rt->transport_params.blk_pkg_mode = pcfg->bp_mode;
+ if (pcfg->word_length != SWR_INVALID_PARAM) {
+ sdw_fill_port_params(&p_rt->port_params,
+ p_rt->num, pcfg->word_length + 1,
+ SDW_PORT_FLOW_MODE_ISOCH,
+ SDW_PORT_DATA_MODE_NORMAL);
+ }
+
}
list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
@@ -489,6 +534,18 @@ static int qcom_swrm_compute_params(struct sdw_bus *bus)
p_rt->transport_params.offset1 = pcfg->off1;
p_rt->transport_params.offset2 = pcfg->off2;
p_rt->transport_params.blk_pkg_mode = pcfg->bp_mode;
+ p_rt->transport_params.blk_grp_ctrl = pcfg->blk_group_count;
+
+ p_rt->transport_params.hstart = pcfg->hstart;
+ p_rt->transport_params.hstop = pcfg->hstop;
+ p_rt->transport_params.lane_ctrl = pcfg->lane_control;
+ if (pcfg->word_length != SWR_INVALID_PARAM) {
+ sdw_fill_port_params(&p_rt->port_params,
+ p_rt->num,
+ pcfg->word_length + 1,
+ SDW_PORT_FLOW_MODE_ISOCH,
+ SDW_PORT_DATA_MODE_NORMAL);
+ }
i++;
}
}
@@ -744,6 +801,11 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
u8 off2[QCOM_SDW_MAX_PORTS];
u8 si[QCOM_SDW_MAX_PORTS];
u8 bp_mode[QCOM_SDW_MAX_PORTS] = { 0, };
+ u8 hstart[QCOM_SDW_MAX_PORTS];
+ u8 hstop[QCOM_SDW_MAX_PORTS];
+ u8 word_length[QCOM_SDW_MAX_PORTS];
+ u8 blk_group_count[QCOM_SDW_MAX_PORTS];
+ u8 lane_control[QCOM_SDW_MAX_PORTS];
int i, ret, nports, val;
ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);
@@ -791,11 +853,32 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode",
bp_mode, nports);
+
+ memset(hstart, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
+ of_property_read_u8_array(np, "qcom,ports-hstart", hstart, nports);
+
+ memset(hstop, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
+ of_property_read_u8_array(np, "qcom,ports-hstop", hstop, nports);
+
+ memset(word_length, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
+ of_property_read_u8_array(np, "qcom,ports-word-length", word_length, nports);
+
+ memset(blk_group_count, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
+ of_property_read_u8_array(np, "qcom,ports-block-group-count", blk_group_count, nports);
+
+ memset(lane_control, SWR_INVALID_PARAM, QCOM_SDW_MAX_PORTS);
+ of_property_read_u8_array(np, "qcom,ports-lane-control", lane_control, nports);
+
for (i = 0; i < nports; i++) {
ctrl->pconfig[i].si = si[i];
ctrl->pconfig[i].off1 = off1[i];
ctrl->pconfig[i].off2 = off2[i];
ctrl->pconfig[i].bp_mode = bp_mode[i];
+ ctrl->pconfig[i].hstart = hstart[i];
+ ctrl->pconfig[i].hstop = hstop[i];
+ ctrl->pconfig[i].word_length = word_length[i];
+ ctrl->pconfig[i].blk_group_count = blk_group_count[i];
+ ctrl->pconfig[i].lane_control = lane_control[i];
}
return 0;
--
2.21.0
More information about the Alsa-devel
mailing list