[PATCH AUTOSEL 4.9 05/13] ASoC: sgtl5000: set DAP_AVC_CTRL register to correct default value on probe

[Sasha Levin]

From: Benjamin Rood <benjaminjrood at gmail.com>

[ Upstream commit f86f58e3594fb0ab1993d833d3b9a2496f3c928c ]

According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has
the following bit field definitions:

| BITS  | FIELD       | RW | RESET | DEFINITION                        |
| 15    | RSVD        | RO | 0x0   | Reserved                          |
| 14    | RSVD        | RW | 0x1   | Reserved                          |
| 13:12 | MAX_GAIN    | RW | 0x1   | Max Gain of AVC in expander mode  |
| 11:10 | RSVD        | RO | 0x0   | Reserved                          |
| 9:8   | LBI_RESP    | RW | 0x1   | Integrator Response               |
| 7:6   | RSVD        | RO | 0x0   | Reserved                          |
| 5     | HARD_LMT_EN | RW | 0x0   | Enable hard limiter mode          |
| 4:1   | RSVD        | RO | 0x0   | Reserved                          |
| 0     | EN          | RW | 0x0   | Enable/Disable AVC                |

The original default value written to the DAP_AVC_CTRL register during
sgtl5000_i2c_probe() was 0x0510.  This would incorrectly write values to
bits 4 and 10, which are defined as RESERVED.  It would also not set
bits 12 and 14 to their correct RESET values of 0x1, and instead set
them to 0x0.  While the DAP_AVC module is effectively disabled because
the EN bit is 0, this default value is still writing invalid values to
registers that are marked as read-only and RESERVED as well as not
setting bits 12 and 14 to their correct default values as defined by the
datasheet.

The correct value that should be written to the DAP_AVC_CTRL register is
0x5100, which configures the register bits to the default values defined
by the datasheet, and prevents any writes to bits defined as
'read-only'.  Generally speaking, it is best practice to NOT attempt to
write values to registers/bits defined as RESERVED, as it generally
produces unwanted/undefined behavior, or errors.

Also, all credit for this patch should go to my colleague Dan MacDonald
<dmacdonald at curbellmedical.com> for finding this error in the first
place.

[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf

Signed-off-by: Benjamin Rood <benjaminjrood at gmail.com>
Reviewed-by: Fabio Estevam <festevam at gmail.com>
Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev
Signed-off-by: Mark Brown <broonie at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 0c2a1413a8f5..14e564e38f3c 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -75,7 +75,7 @@ static const struct reg_default sgtl5000_reg_defaults[] = {
 	{ SGTL5000_DAP_EQ_BASS_BAND4,		0x002f },
 	{ SGTL5000_DAP_MAIN_CHAN,		0x8000 },
 	{ SGTL5000_DAP_MIX_CHAN,		0x0000 },
-	{ SGTL5000_DAP_AVC_CTRL,		0x0510 },
+	{ SGTL5000_DAP_AVC_CTRL,		0x5100 },
 	{ SGTL5000_DAP_AVC_THRESHOLD,		0x1473 },
 	{ SGTL5000_DAP_AVC_ATTACK,		0x0028 },
 	{ SGTL5000_DAP_AVC_DECAY,		0x0050 },
-- 
2.30.1