[PATCH] dt-bindings: Drop type references on common properties
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Tue Mar 16 21:23:45 CET 2021
On Tue, 16 Mar 2021 at 22:49, Rob Herring <robh at kernel.org> wrote:
>
> Users of common properties shouldn't have a type definition as the
> common schemas already have one. Drop all the unnecessary type
> references in the tree.
>
> A meta-schema update to catch these is pending.
>
> Cc: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
> Cc: Maxime Ripard <mripard at kernel.org>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> Cc: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
> Cc: Krzysztof Kozlowski <krzk at kernel.org>
> Cc: Marc Kleine-Budde <mkl at pengutronix.de>
> Cc: "David S. Miller" <davem at davemloft.net>
> Cc: Jakub Kicinski <kuba at kernel.org>
> Cc: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> Cc: Ohad Ben-Cohen <ohad at wizery.com>
> Cc: Mark Brown <broonie at kernel.org>
> Cc: Cheng-Yi Chiang <cychiang at chromium.org>
> Cc: Benson Leung <bleung at chromium.org>
> Cc: Zhang Rui <rui.zhang at intel.com>
> Cc: Daniel Lezcano <daniel.lezcano at linaro.org>
> Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> Cc: Stefan Wahren <wahrenst at gmx.net>
> Cc: Masahiro Yamada <yamada.masahiro at socionext.com>
> Cc: Odelu Kukatla <okukatla at codeaurora.org>
> Cc: Alex Elder <elder at kernel.org>
> Cc: Suman Anna <s-anna at ti.com>
> Cc: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
> Cc: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> Cc: linux-gpio at vger.kernel.org
> Cc: linux-pm at vger.kernel.org
> Cc: linux-can at vger.kernel.org
> Cc: netdev at vger.kernel.org
> Cc: linux-remoteproc at vger.kernel.org
> Cc: alsa-devel at alsa-project.org
> Cc: linux-usb at vger.kernel.org
> Signed-off-by: Rob Herring <robh at kernel.org>
> ---
> .../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml | 5 +----
> Documentation/devicetree/bindings/arm/cpus.yaml | 2 --
> .../bindings/display/allwinner,sun4i-a10-tcon.yaml | 1 -
> .../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 3 +--
> .../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 1 -
> .../devicetree/bindings/interconnect/qcom,rpmh.yaml | 1 -
> .../bindings/memory-controllers/nvidia,tegra210-emc.yaml | 2 +-
> Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml | 1 -
> Documentation/devicetree/bindings/net/qcom,ipa.yaml | 1 -
> Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml | 2 --
> .../devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml | 2 +-
> Documentation/devicetree/bindings/sound/ak4642.yaml | 2 --
> .../devicetree/bindings/sound/google,cros-ec-codec.yaml | 2 +-
> Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 1 -
> .../devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 -
> Documentation/devicetree/bindings/usb/usb.yaml | 1 -
> 16 files changed, 5 insertions(+), 23 deletions(-)
For the qcom-spmi-adc-tm5.yaml:
Acked-by: Dmity Baryshkov <dmitry.baryshkov at linaro.org>
>
> diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
> index a2c63c8b1d10..c6144c8421fa 100644
> --- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
> +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
> @@ -26,10 +26,7 @@ properties:
> - const: simple-mfd
>
> mboxes:
> - $ref: '/schemas/types.yaml#/definitions/phandle'
> - description: |
> - Phandle to the firmware device's Mailbox.
> - (See: ../mailbox/mailbox.txt for more information)
> + maxItems: 1
>
> clocks:
> type: object
> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
> index 26b886b20b27..6be4a8852ee5 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
> @@ -256,13 +256,11 @@ properties:
> where voltage is in V, frequency is in MHz.
>
> power-domains:
> - $ref: '/schemas/types.yaml#/definitions/phandle-array'
> description:
> List of phandles and PM domain specifiers, as defined by bindings of the
> PM domain provider (see also ../power_domain.txt).
>
> power-domain-names:
> - $ref: '/schemas/types.yaml#/definitions/string-array'
> description:
> A list of power domain name strings sorted in the same order as the
> power-domains property.
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> index c13faf3e6581..3a7d5d731712 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> @@ -73,7 +73,6 @@ properties:
> clock-output-names:
> description:
> Name of the LCD pixel clock created.
> - $ref: /schemas/types.yaml#/definitions/string-array
> maxItems: 1
>
> dmas:
> diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> index 1a54db04f29d..bcafa494ed7a 100644
> --- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> +++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
> @@ -43,8 +43,7 @@ properties:
>
> gpio-ranges: true
>
> - gpio-ranges-group-names:
> - $ref: /schemas/types.yaml#/definitions/string-array
> + gpio-ranges-group-names: true
>
> socionext,interrupt-ranges:
> description: |
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> index 6f2398cdc82d..1e7894e524f9 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
> @@ -102,7 +102,6 @@ patternProperties:
>
> st,adc-channel-names:
> description: List of single-ended channel names.
> - $ref: /schemas/types.yaml#/definitions/string-array
>
> st,filter-order:
> description: |
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
> index 799e73cdb90b..13da7b29c707 100644
> --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
> @@ -82,7 +82,6 @@ properties:
> this interconnect to send RPMh commands.
>
> qcom,bcm-voter-names:
> - $ref: /schemas/types.yaml#/definitions/string-array
> description: |
> Names for each of the qcom,bcm-voters specified.
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
> index 49ab09252e52..bc8477e7ab19 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
> @@ -34,7 +34,7 @@ properties:
> - description: EMC general interrupt
>
> memory-region:
> - $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> description:
> phandle to a reserved memory region describing the table of EMC
> frequencies trained by the firmware
> diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> index fe6a949a2eab..55bff1586b6f 100644
> --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
> @@ -57,7 +57,6 @@ properties:
> - const: per
>
> clock-frequency:
> - $ref: /schemas/types.yaml#/definitions/uint32
> description: |
> The oscillator frequency driving the flexcan device, filled in by the
> boot loader. This property should only be used the used operating system
> diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> index 8f86084bf12e..4e8dee4aa90d 100644
> --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> @@ -100,7 +100,6 @@ properties:
> - description: Whether the IPA clock is enabled (if valid)
>
> qcom,smem-state-names:
> - $ref: /schemas/types.yaml#/definitions/string-array
> description: The names of the state bits used for SMP2P output
> items:
> - const: ipa-clock-enabled-valid
> diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
> index d5d7f113bade..828e4a1ece41 100644
> --- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
> @@ -23,12 +23,10 @@ properties:
> List of phandle to the nvmem data cells.
>
> nvmem-names:
> - $ref: /schemas/types.yaml#/definitions/string-array
> description:
> Names for the each nvmem provider.
>
> nvmem-cell-names:
> - $ref: /schemas/types.yaml#/definitions/string-array
> description:
> Names for each nvmem-cells specified.
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
> index 1a1159097a2a..73400bc6e91d 100644
> --- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
> @@ -93,7 +93,7 @@ properties:
> # The following are the optional properties:
>
> memory-region:
> - $ref: /schemas/types.yaml#/definitions/phandle
> + maxItems: 1
> description: |
> phandle to the reserved memory node to be associated
> with the remoteproc device. The reserved memory node
> diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/ak4642.yaml
> index 6cd213be2266..1e2caa29790e 100644
> --- a/Documentation/devicetree/bindings/sound/ak4642.yaml
> +++ b/Documentation/devicetree/bindings/sound/ak4642.yaml
> @@ -29,11 +29,9 @@ properties:
>
> clock-frequency:
> description: common clock binding; frequency of MCKO
> - $ref: /schemas/types.yaml#/definitions/uint32
>
> clock-output-names:
> description: common clock name
> - $ref: /schemas/types.yaml#/definitions/string
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
> index acfb9db021dc..77adbebed824 100644
> --- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
> +++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
> @@ -32,7 +32,7 @@ properties:
> The last one integer is the length of the shared memory.
>
> memory-region:
> - $ref: '/schemas/types.yaml#/definitions/phandle'
> + maxItems: 1
> description: |
> Shared memory region to EC. A "shared-dma-pool".
> See ../reserved-memory/reserved-memory.txt for details.
> diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
> index 2e1046513603..e494a0416748 100644
> --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
> +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
> @@ -78,7 +78,6 @@ properties:
>
> clock-frequency:
> description: for audio_clkout0/1/2/3
> - $ref: /schemas/types.yaml#/definitions/uint32-array
>
> clkout-lr-asynchronous:
> description: audio_clkoutn is asynchronizes with lr-clock.
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> index 95a728f4d333..3ea8c0c1f45f 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> @@ -59,7 +59,6 @@ patternProperties:
>
> properties:
> reg:
> - $ref: /schemas/types.yaml#/definitions/uint32
> description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
> minimum: 0
> maximum: 7
> diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml
> index 78491e66ed24..939f217b8c7b 100644
> --- a/Documentation/devicetree/bindings/usb/usb.yaml
> +++ b/Documentation/devicetree/bindings/usb/usb.yaml
> @@ -16,7 +16,6 @@ properties:
> pattern: "^usb(@.*)?"
>
> phys:
> - $ref: /schemas/types.yaml#/definitions/phandle-array
> description:
> List of all the USB PHYs on this HCD
>
> --
> 2.27.0
>
--
With best wishes
Dmitry
More information about the Alsa-devel
mailing list