[PATCH] ASoC: Intel: sof_rt5682: Add rt1015p speaker amp support

[Pierre-Louis Bossart]

I am not a big fan of the code partition you've selected.

> +void sof_rt1015p_set_share_en_spk(void)
> +{
> +	/* Two amps share one en pin so there is only one device in acpi
> +	 * table
> +	 */
> +	rt1015p_quirk |= RT1015P_SHARE_EN_SPK;
> +}

This is a function now used in the machine driver, see below [1]
This adds a new interface between machine and realtek common code, which 
we are trying to move to a module with well-defined APIs.

> +void sof_rt1015p_dai_link(struct snd_soc_dai_link *link)
> +{
> +	link->codecs = rt1015p_dai_link_components;
> +	if (rt1015p_quirk & RT1015P_SHARE_EN_SPK)
> +		link->num_codecs = 1;
> +	else
> +		link->num_codecs = ARRAY_SIZE(rt1015p_dai_link_components);
> +	link->init = rt1015p_init;
> +	link->ops = &rt1015p_ops;
> +}
> +
> +void sof_rt1015p_codec_conf(struct snd_soc_card *card)
> +{
> +	if (rt1015p_quirk & RT1015P_SHARE_EN_SPK)
> +		return;
> +
> +	card->codec_conf = rt1015p_codec_confs;
> +	card->num_configs = ARRAY_SIZE(rt1015p_codec_confs);
> +}

could we not handle this quirk inside one of the two dai_link or 
codec_conf functions above?
The machine driver does not care about this RT1015P_SHARE_EN_SPK quirk, 
it's only used in those two functions so should be set in this scope. 
There's no need to make it visible to the machine driver, is there?

> +	/* setup amp quirk if any */
> +	if (sof_rt5682_quirk & SOF_RT1015P_SPEAKER_AMP_PRESENT) {
> +		/* There may be only one device instance if two amps
> +		 * sharing one en pin
> +		 */
> +		if (!acpi_dev_present("RTL1015", "1", -1)) {
> +			dev_dbg(&pdev->dev, "Device %s not exist\n",
> +				RT1015P_DEV1_NAME);
> +			sof_rt1015p_set_share_en_spk();
> +		}
> +	}
> +

[1]

I see no problem using the _UID (Unique ID) to check if a second 
amplifier is present or not. This seems to follow the ACPI spec Section 
6.1.12, as long as "the _UID must be unique across all devices with 
either a common _HID or _CID"


> +	else if (sof_rt5682_quirk & SOF_RT1015P_SPEAKER_AMP_PRESENT)
> +		sof_rt1015p_codec_conf(&sof_audio_card_rt5682);