[PATCH v4 0/9] soundwire: qcom: various improvements

[Pierre-Louis Bossart]

On 3/12/21 6:00 AM, Srinivas Kandagatla wrote:
> Thanks for reviewing v3 of this patchset!
> 
> During testing SoundWire controller on SM8250 MTP, we found
> few issues like all the interrupts are not handled,
> all transport parameters are not read from device tree.
> Patch to add Auto Enumeration supported by the controller
> is also part of this series.
> 
> Other major issue was register read/writes which was interrupt based
> was an overhead and puts lot of limitation on context it can be used from.
> 
> With previous approach number of interrupts generated
> after enumeration are around 130:
> $ cat /proc/interrupts  | grep soundwire
> 21: 130 0 0 0 0 0 0 0 GICv3 234 Edge      soundwire
>      
> after this patch they are just 3 interrupts
> $ cat /proc/interrupts  | grep soundwire
> 21: 3 0 0 0 0 0 0 0 GICv3 234 Edge      soundwire
> 
> So this patchset add various improvements to the existing driver
> to address above issues.
> 
> Tested it on SM8250 MTP with 2x WSA881x speakers, HeadPhones on
> WCD938x via lpass-rx-macro and Analog MICs via lpass-tx-macro.
> Also tested on DragonBoard DB845c with 2xWSA881x speakers.

LGTM, for the series

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>

> 
> Changes since v3:
> 	- Fixed setting assigned bit during autoenumeration
> 
> Srinivas Kandagatla (9):
>    dt-bindings: soundwire: qcom: clarify data port bus parameters
>    soundwire: qcom: add support to missing transport params
>    soundwire: qcom: set continue execution flag for ignored commands
>    soundwire: qcom: start the clock during initialization
>    soundwire: qcom: update register read/write routine
>    soundwire: qcom: add support to new interrupts
>    soundwire: export sdw_compare_devid() and sdw_extract_slave_id()
>    soundwire: qcom: add auto enumeration support
>    soundwire: qcom: wait for enumeration to be complete in probe
> 
>   .../bindings/soundwire/qcom,sdw.txt           |  20 +
>   drivers/soundwire/bus.c                       |   4 +-
>   drivers/soundwire/qcom.c                      | 529 ++++++++++++++----
>   include/linux/soundwire/sdw.h                 |   2 +
>   4 files changed, 442 insertions(+), 113 deletions(-)
>