[PATCH v2 4/5] ASoC: dt-bindings: wsa881x: add bindings for port mapping

[Rob Herring]

On Tue, 09 Mar 2021 14:15:13 +0000, Srinivas Kandagatla wrote:
> WSA881x SoundWire device ports are statically assigned to master ports
> at design time. So add bindings required to specify these mappings!
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> ---
>  .../devicetree/bindings/sound/qcom,wsa881x.yaml          | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.example.dt.yaml: speaker at 0,1: 'qcom-port-mapping' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.example.dt.yaml: speaker at 0,2: 'qcom-port-mapping' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml

See https://patchwork.ozlabs.org/patch/1449860

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.