[PATCH 06/15] ASoC: rt700-sdw: use first_hw_init flag on resume

[Pierre-Louis Bossart]

The intent of the status check on resume was to verify if a SoundWire
peripheral reported ATTACHED before waiting for the initialization to
complete. This is required to avoid timeouts that will happen with
'ghost' devices that are exposed in the platform firmware but are not
populated in hardware.

Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to
another error, the resume operation never timed out, but the volume
settings were not properly restored.

BugLink: https://github.com/thesofproject/linux/issues/2908
BugLink: https://github.com/thesofproject/linux/issues/2637
Fixes: 7d2a5f9ae41e3 ('ASoC: rt700: add rt700 codec driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski at linux.intel.com>
Reviewed-by: Bard Liao <bard.liao at intel.com>
---
 sound/soc/codecs/rt700-sdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt700-sdw.c b/sound/soc/codecs/rt700-sdw.c
index ff9c081fd52a..d1d9c0f455b4 100644
--- a/sound/soc/codecs/rt700-sdw.c
+++ b/sound/soc/codecs/rt700-sdw.c
@@ -498,7 +498,7 @@ static int __maybe_unused rt700_dev_resume(struct device *dev)
 	struct rt700_priv *rt700 = dev_get_drvdata(dev);
 	unsigned long time;
 
-	if (!rt700->hw_init)
+	if (!rt700->first_hw_init)
 		return 0;
 
 	if (!slave->unattach_request)
-- 
2.25.1