[PATCH v2 0/9] Tegra186 and Tegra194 audio graph card

[Sameer Pujar]

This series adds support for audio graph based solution on Tegra186 and
Tegra194. This enables audio paths for I2S, DMIC and DSPK modules.

Depending on the platform Jetson TX2 or Jetson AGX Xavier, required I/O
module instances are enabled. Since the latter board has on board audio
codec, DT support for the same is enabled and external audio playback and
capture can be used.

Changelog
=========

v1 --> v2:
----------
  - Dropped patch "ASoC: tegra: Select SND_SOC_RT5659" as per suggestion
    from Mark.
  - Add new patch "ASoC: rt5659: Add Kconfig prompt"
  - Add new patch "arm64: defconfig: Enable RT5659"
  - No changes in other patches from earlier series.


Sameer Pujar (9):
  ASoC: dt-bindings: rt5659: Update binding doc
  ASoC: dt-bindings: tegra: Add iommus property to Tegra graph card
  ASoC: audio-graph-card: Add clocks property to endpoint node
  ASoC: rt5659: Add Kconfig prompt
  arm64: defconfig: Enable RT5659
  arm64: tegra: Add RT5658 device entry
  Revert "arm64: tegra: Disable the ACONNECT for Jetson TX2"
  arm64: tegra: Audio graph sound card for Jetson TX2
  arm64: tegra: Audio graph sound card for Jetson AGX Xavier

 .../bindings/sound/audio-graph-port.yaml           |   3 +
 .../sound/nvidia,tegra-audio-graph-card.yaml       |   3 +
 Documentation/devicetree/bindings/sound/rt5659.txt |  11 +
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 609 +++++++++++++++++++++
 arch/arm64/boot/dts/nvidia/tegra186.dtsi           |  22 +
 arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 468 ++++++++++++++++
 arch/arm64/boot/dts/nvidia/tegra194.dtsi           |  20 +
 arch/arm64/configs/defconfig                       |   1 +
 sound/soc/codecs/Kconfig                           |   2 +-
 9 files changed, 1138 insertions(+), 1 deletion(-)

-- 
2.7.4