[PATCH v2 03/12] ASoC: arizona-jack: Fix some issues when HPDET IRQ fires after the jack has been unplugged

[Charles Keepax]

On Sun, Jan 17, 2021 at 05:05:46PM +0100, Hans de Goede wrote:
> When the jack is partially inserted and then removed again it may be
> removed while the hpdet code is running. In this case the following
> may happen:
> 
> 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers
> 2. arizona_jackdet runs and takes info->lock
> 3. The "HPDET" IRQ triggers
> 4. arizona_hpdet_irq runs, blocks on info->lock
> 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done
> 6. arizona_jackdet releases info->lock
> 7. arizona_hpdet_irq now can continue running and:
> 7.1 Calls arizona_start_mic() (if a mic was detected)
> 7.2 sets info->hpdet_done
> 
> Step 7 is undesirable / a bug:
> 7.1 causes the device to stay in a high power-state (with MICVDD enabled)
> 7.2 causes hpdet to not run on the next jack insertion, which in turn
>     causes the EXTCON_JACK_HEADPHONE state to never get set
> 
> This fixes both issues by skipping these 2 steps when arizona_hpdet_irq
> runs after the jack has been unplugged.
> 
> Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---

Acked-by: Charles Keepax <ckeepax at opensource.cirrus.com>

Thanks,
Charles