[PATCH v3 3/5] mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI

[Mark Brown]

On Sun, Jan 17, 2021 at 10:22:50PM +0100, Hans de Goede wrote:

> +	/*
> +	 * Some DSDTs wrongly declare the IRQ trigger-type as IRQF_TRIGGER_FALLING
> +	 * The IRQ line will stay low when a new IRQ event happens between reading
> +	 * the IRQ status flags and acknowledging them. When the IRQ line stays
> +	 * low like this the IRQ will never trigger again when its type is set
> +	 * to IRQF_TRIGGER_FALLING. Correct the IRQ trigger-type to fix this.
> +	 */
> +	arizona->pdata.irq_flags = IRQF_TRIGGER_LOW;

Are you sure that all the relevant interrupt controllers support active
low interrupts?  There were issues on some systems with missing support
for active low interrupts (see the bodge in wm8994-irq.c to work around
them) - it's entirely likely that there are DSDTs that are just plain
buggy here but if someone's copying and pasting it smells like there may
be some systems that actually need an edge triggered interrupt that
they're getting it from.

> +
> +	/* Wait 200 ms after jack insertion */
> +	arizona->pdata.micd_detect_debounce = 200;
> +
> +	/* Use standard AOSP values for headset-button mappings */
> +	arizona->pdata.micd_ranges = arizona_micd_aosp_ranges;
> +	arizona->pdata.num_micd_ranges = ARRAY_SIZE(arizona_micd_aosp_ranges);
> +
> +	return 0;
> +}
> +
> +static const struct acpi_device_id arizona_acpi_match[] = {
> +	{
> +		.id = "WM510204",
> +		.driver_data = WM5102,
> +	},
> +	{
> +		.id = "WM510205",
> +		.driver_data = WM5102,
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(acpi, arizona_acpi_match);
> +#else
> +static int arizona_spi_acpi_probe(struct arizona *arizona)
> +{
> +	return -ENODEV;
> +}
> +#endif
> +
>  static int arizona_spi_probe(struct spi_device *spi)
>  {
>  	const struct spi_device_id *id = spi_get_device_id(spi);
> @@ -77,6 +191,12 @@ static int arizona_spi_probe(struct spi_device *spi)
>  	arizona->dev = &spi->dev;
>  	arizona->irq = spi->irq;
>  
> +	if (has_acpi_companion(&spi->dev)) {
> +		ret = arizona_spi_acpi_probe(arizona);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	return arizona_dev_init(arizona);
>  }
>  
> @@ -104,6 +224,7 @@ static struct spi_driver arizona_spi_driver = {
>  		.name	= "arizona",
>  		.pm	= &arizona_pm_ops,
>  		.of_match_table	= of_match_ptr(arizona_of_match),
> +		.acpi_match_table = ACPI_PTR(arizona_acpi_match),
>  	},
>  	.probe		= arizona_spi_probe,
>  	.remove		= arizona_spi_remove,
> -- 
> 2.28.0
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20210118/54bbf0e3/attachment.sig>