[PATCH 03/14] mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI
Hans de Goede
hdegoede at redhat.com
Sat Jan 16 15:46:42 CET 2021
Hi,
Thank you for the review.
On 12/28/20 3:14 PM, Andy Shevchenko wrote:
> On Sun, Dec 27, 2020 at 11:16 PM Hans de Goede <hdegoede at redhat.com> wrote:
>>
>> The Intel Bay Trail (x86/ACPI) based Lenovo Yoga Tablet 2 series use
>> a WM5102 codec connected over SPI.
>>
>> Add support for ACPI enumeration to arizona-spi so that arizona-spi can
>> bind to the codec on these tablets.
>>
>> This is loosely based on an earlier attempt (for Android-x86) at this by
>> Christian Hartmann, combined with insights in things like the speaker GPIO
>> from the android-x86 android port for the Lenovo Yoga Tablet 2 1051F/L [1].
>
> Few nitpicks here and there, but the most important bit that hits me
> is device_get_match_data().
>
>> [1] https://github.com/Kitsune2222/Android_Yoga_Tablet_2-1051F_Kernel
>>
>> Cc: Christian Hartmann <cornogle at googlemail.com>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>> drivers/mfd/arizona-spi.c | 120 ++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 120 insertions(+)
>>
>> diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
>> index 704f214d2614..bcdbd72fefb5 100644
>> --- a/drivers/mfd/arizona-spi.c
>> +++ b/drivers/mfd/arizona-spi.c
>> @@ -7,7 +7,10 @@
>> * Author: Mark Brown <broonie at opensource.wolfsonmicro.com>
>> */
>>
>> +#include <linux/acpi.h>
>> #include <linux/err.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/gpio/machine.h>
>> #include <linux/module.h>
>> #include <linux/pm_runtime.h>
>> #include <linux/regmap.h>
>> @@ -15,11 +18,119 @@
>> #include <linux/slab.h>
>> #include <linux/spi/spi.h>
>> #include <linux/of.h>
>> +#include <uapi/linux/input-event-codes.h>
>>
>> #include <linux/mfd/arizona/core.h>
>>
>> #include "arizona.h"
>>
>> +#ifdef CONFIG_ACPI
>> +const struct acpi_gpio_params reset_gpios = { 1, 0, false };
>> +const struct acpi_gpio_params ldoena_gpios = { 2, 0, false };
>> +
>> +static const struct acpi_gpio_mapping arizona_acpi_gpios[] = {
>> + { "reset-gpios", &reset_gpios, 1, },
>> + { "wlf,ldoena-gpios", &ldoena_gpios, 1 },
>> + { }
>> +};
>> +
>> +/*
>> + * The ACPI resources for the device only describe external GPIO-s. They do
>> + * not provide mappings for the GPIO-s coming from the Arizona codec itself.
>> + */
>> +static const struct gpiod_lookup arizona_soc_gpios[] = {
>> + { "arizona", 2, "wlf,spkvdd-ena", 0, GPIO_ACTIVE_HIGH },
>> + { "arizona", 4, "wlf,micd-pol", 0, GPIO_ACTIVE_LOW },
>> +};
>> +
>> +/*
>> + * The AOSP 3.5 mm Headset: Accessory Specification gives the following values:
>> + * Function A Play/Pause: 0 ohm
>> + * Function D Voice assistant: 135 ohm
>> + * Function B Volume Up 240 ohm
>> + * Function C Volume Down 470 ohm
>> + * Minimum Mic DC resistance 1000 ohm
>> + * Minimum Ear speaker impedance 16 ohm
>> + * Note the first max value below must be less then the min. speaker impedance,
>> + * to allow CTIA/OMTP detection to work. The other max values are the closest
>> + * value from extcon-arizona.c:arizona_micd_levels halfway 2 button resistances.
>> + */
>> +static const struct arizona_micd_range arizona_micd_aosp_ranges[] = {
>> + { .max = 11, .key = KEY_PLAYPAUSE },
>> + { .max = 186, .key = KEY_VOICECOMMAND },
>> + { .max = 348, .key = KEY_VOLUMEUP },
>> + { .max = 752, .key = KEY_VOLUMEDOWN },
>> +};
>> +
>> +static void arizona_spi_acpi_remove_lookup(void *lookup)
>> +{
>> + gpiod_remove_lookup_table(lookup);
>> +}
>> +
>> +static int arizona_spi_acpi_probe(struct arizona *arizona)
>> +{
>> + struct gpiod_lookup_table *lookup;
>> + int i, ret;
>> +
>> + /* Add mappings for the 2 ACPI declared GPIOs used for reset and ldo-ena */
>> + devm_acpi_dev_add_driver_gpios(arizona->dev, arizona_acpi_gpios);
>> +
>> + /* Add lookups for the SoCs own GPIOs used for micdet-polarity and spkVDD-enable */
>> + lookup = devm_kzalloc(arizona->dev,
>> + struct_size(lookup, table, ARRAY_SIZE(arizona_soc_gpios) + 1),
>> + GFP_KERNEL);
>> + if (!lookup)
>> + return -ENOMEM;
>> +
>> + lookup->dev_id = dev_name(arizona->dev);
>
>> + for (i = 0; i < ARRAY_SIZE(arizona_soc_gpios); i++)
>> + lookup->table[i] = arizona_soc_gpios[i];
>
> Would memcpy() do the same at one pass?
True, fixed for v2.
>> + gpiod_add_lookup_table(lookup);
>> + ret = devm_add_action_or_reset(arizona->dev, arizona_spi_acpi_remove_lookup, lookup);
>> + if (ret)
>> + return ret;
>
>> + /* Enable 32KHz clock from SoC to codec for jack-detect */
>> + acpi_evaluate_object(ACPI_HANDLE(arizona->dev), "CLKE", NULL, NULL);
>
> No error check?
The codec will still work without the 32KHz clk, but we will loose jack-detect
functionality. I expect the ACPI call to already print some error, but to make
sure something is logged and to clarify what any previous logged ACPI errors are
about I've added code to log a warning when this fails for v2.
>
>> + /*
>> + * Some DSDTs wrongly declare the IRQ trigger-type as IRQF_TRIGGER_FALLING
>> + * The IRQ line will stay low when a new IRQ event happens between reading
>> + * the IRQ status flags and acknowledging them. When the IRQ line stays
>> + * low like this the IRQ will never trigger again when its type is set
>> + * to IRQF_TRIGGER_FALLING. Correct the IRQ trigger-type to fix this.
>> + */
>> + arizona->pdata.irq_flags = IRQF_TRIGGER_LOW;
>> +
>> + /* Wait 200 ms after jack insertion */
>> + arizona->pdata.micd_detect_debounce = 200;
>> +
>> + /* Use standard AOSP values for headset-button mappings */
>> + arizona->pdata.micd_ranges = arizona_micd_aosp_ranges;
>> + arizona->pdata.num_micd_ranges = ARRAY_SIZE(arizona_micd_aosp_ranges);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct acpi_device_id arizona_acpi_match[] = {
>> + {
>> + .id = "WM510204",
>> + .driver_data = WM5102,
>> + },
>> + {
>> + .id = "WM510205",
>> + .driver_data = WM5102,
>> + },
>
>> + { },
>
> No need for comma here.
Fixed for v2.
>
>> +};
>> +MODULE_DEVICE_TABLE(acpi, arizona_acpi_match);
>> +#else
>
>> +static void arizona_spi_acpi_probe(struct arizona *arizona)
>> +{
>> +}
>
> Can be one line?
I find it more readable as is.
>
>> +#endif
>> +
>> static int arizona_spi_probe(struct spi_device *spi)
>> {
>> const struct spi_device_id *id = spi_get_device_id(spi);
>> @@ -30,6 +141,8 @@ static int arizona_spi_probe(struct spi_device *spi)
>>
>> if (spi->dev.of_node)
>> type = arizona_of_get_type(&spi->dev);
>> + else if (ACPI_COMPANION(&spi->dev))
>> + type = (unsigned long)acpi_device_get_match_data(&spi->dev);
>
> Can we rather get rid of these and use device_get_match_data() directly?
That is a good idea, I'll add a nw preparation patch to v2 replacing the
custom arizona_of_get_type() helper with device_get_match_data().
>> else
>> type = id->driver_data;
>>
>> @@ -75,6 +188,12 @@ static int arizona_spi_probe(struct spi_device *spi)
>> arizona->dev = &spi->dev;
>> arizona->irq = spi->irq;
>>
>> + if (ACPI_COMPANION(&spi->dev)) {
>
> has_acpi_companion() ?
Fixed for v2.
>> + ret = arizona_spi_acpi_probe(arizona);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> return arizona_dev_init(arizona);
>> }
>>
>> @@ -102,6 +221,7 @@ static struct spi_driver arizona_spi_driver = {
>> .name = "arizona",
>> .pm = &arizona_pm_ops,
>> .of_match_table = of_match_ptr(arizona_of_match),
>> + .acpi_match_table = ACPI_PTR(arizona_acpi_match),
>> },
>> .probe = arizona_spi_probe,
>> .remove = arizona_spi_remove,
>> --
>> 2.28.0
>>
>
>
Regards,
Hans
More information about the Alsa-devel
mailing list