[PATCH 2/3] soundwire: qcom: add auto enumeration support

[Pierre-Louis Bossart]

> +static int qcom_swrm_enumerate(struct sdw_bus *bus)
> +{
> +	struct qcom_swrm_ctrl *ctrl = to_qcom_sdw(bus);
> +	struct sdw_slave *slave, *_s;
> +	struct sdw_slave_id id;
> +	u32 val1, val2;
> +	u64 addr;
> +	int i;
> +	char *buf1 = (char *)&val1, *buf2 = (char *)&val2;
> +
> +	for (i = 1; i < (SDW_MAX_DEVICES + 1); i++) {

I don't understand the (SDW_MAX_DEVICES + 1)?


> +		/*SCP_Devid5 - Devid 4*/
> +		ctrl->reg_read(ctrl, SWRM_ENUMERATOR_SLAVE_DEV_ID_1(i), &val1);
> +
> +		/*SCP_Devid3 - DevId 2 Devid 1 Devid 0*/
> +		ctrl->reg_read(ctrl, SWRM_ENUMERATOR_SLAVE_DEV_ID_2(i), &val2);

Do you mind explaining a bit what happens here?
Does the hardware issue commands to read all DevID registers and set the 
device number automagically?
If yes, then in SoundWire parlance the enumeration is complete. What you 
are doing below is no longer part of the enumeration.


> +
> +		if (!val1 && !val2)
> +			break;
> +
> +		addr = buf2[1] | (buf2[0] << 8) | (buf1[3] << 16) |
> +			((u64)buf1[2] << 24) | ((u64)buf1[1] << 32) |
> +			((u64)buf1[0] << 40);
> +
> +		sdw_extract_slave_id(bus, addr, &id);
> +		/* Now compare with entries */
> +		list_for_each_entry_safe(slave, _s, &bus->slaves, node) {
> +			if (sdw_compare_devid(slave, id) == 0) {
> +				u32 status = qcom_swrm_get_n_device_status(ctrl, i);
> +				if (status == SDW_SLAVE_ATTACHED) {
> +					slave->dev_num = i;
> +					mutex_lock(&bus->bus_lock);
> +					set_bit(i, bus->assigned);
> +					mutex_unlock(&bus->bus_lock);
> +
> +				}

And that part is strange as well. The bus->assigned bit should be set 
even if the Slave is not in the list provided by platform firmware. It's 
really tracking the state of the hardware, and it should not be 
influenced by what software knows to manage.

> +				break;
> +			}
> +		}
> +	}
> +
> +	complete(&ctrl->enumeration);

you have init_completion() and complete() in this patch, but no 
wait_for_completion(), so that should be added in a later patch, no?

> +	return 0;
> +}
> +
>   static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
>   {
>   	struct qcom_swrm_ctrl *swrm = dev_id;
> -	u32 value, intr_sts, intr_sts_masked;
> +	u32 value, intr_sts, intr_sts_masked, slave_status;
>   	u32 i;
>   	u8 devnum = 0;
>   	int ret = IRQ_HANDLED;
> @@ -382,10 +443,19 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id)
>   				break;
>   			case SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED:
>   			case SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS:
> -				dev_err_ratelimited(swrm->dev, "%s: SWR new slave attached\n",
> +				dev_err_ratelimited(swrm->dev, "%s: SWR slave status changed\n",
>   					__func__);
> -				qcom_swrm_get_device_status(swrm);
> -				sdw_handle_slave_status(&swrm->bus, swrm->status);
> +				swrm->reg_read(swrm, SWRM_MCP_SLV_STATUS, &slave_status);
> +				if (swrm->slave_status == slave_status) {
> +					dev_err(swrm->dev, "Slave status not changed %x\n",
> +						slave_status);
> +					break;
> +				} else {
> +					dev_err(swrm->dev, "Slave status handle %x\n", slave_status);
> +					qcom_swrm_get_device_status(swrm);
> +					qcom_swrm_enumerate(&swrm->bus);
> +					sdw_handle_slave_status(&swrm->bus, swrm->status);
> +				}
>   				break;
>   			case SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET:
>   				dev_err_ratelimited(swrm->dev,
> @@ -472,8 +542,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
>   
>   	ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val);
>   
> -	/* Disable Auto enumeration */
> -	ctrl->reg_write(ctrl, SWRM_ENUMERATOR_CFG_ADDR, 0);
> +	/* Enable Auto enumeration */
> +	ctrl->reg_write(ctrl, SWRM_ENUMERATOR_CFG_ADDR, 1);
>   
>   	ctrl->intr_mask = SWRM_INTERRUPT_STATUS_RMSK;
>   	/* Mask soundwire interrupts */
> @@ -507,6 +577,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
>   		ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN,
>   				SWRM_INTERRUPT_STATUS_RMSK);
>   	}
> +	ctrl->slave_status = 0;
>   	return 0;
>   }
>   
> @@ -1068,6 +1139,7 @@ static int qcom_swrm_probe(struct platform_device *pdev)
>   	dev_set_drvdata(&pdev->dev, ctrl);
>   	mutex_init(&ctrl->port_lock);
>   	init_completion(&ctrl->broadcast);
> +	init_completion(&ctrl->enumeration);
>   
>   	ctrl->bus.ops = &qcom_swrm_ops;
>   	ctrl->bus.port_ops = &qcom_swrm_port_ops;
>