[PATCH 3/4] ASoC: rt5670: Remove ADC vol-ctrl mute bits poking from Sto1 ADC mixer settings

Hans de Goede hdegoede at redhat.com
Mon Feb 15 15:21:17 CET 2021


The SND_SOC_DAPM_MIXER declaration for "Sto1 ADC MIXL" and "Sto1 ADC MIXR"
was using the mute bits from the RT5670_STO1_ADC_DIG_VOL control as mixer
master mute bits.

But these bits are already exposed to userspace as controls as part of the
"ADC Capture Volume" / "ADC Capture Switch" control pair:

        SOC_DOUBLE("ADC Capture Switch", RT5670_STO1_ADC_DIG_VOL,
                RT5670_L_MUTE_SFT, RT5670_R_MUTE_SFT, 1, 1),
        SOC_DOUBLE_TLV("ADC Capture Volume", RT5670_STO1_ADC_DIG_VOL,
                        RT5670_L_VOL_SFT, RT5670_R_VOL_SFT,
                        127, 0, adc_vol_tlv),

Both the fact that the mute bits belong to the same reg as the vol-ctrl
and the "Digital Mixer Path" diagram in the datasheet clearly shows that
these mute bits are not part of the mixer and having 2 separate controls
poking at the same bits is a bad idea.

Remove the master-mute bits settings from the  "Sto1 ADC MIXL" and
"Sto1 ADC MIXR" DAPM widget declarations, avoiding these bits getting
poked from 2 different places.

This should not cause any issues for userspace. AFAICT the rt567x codecs
are only used on x86/ACPI devices and the UCM profiles used there already
set the "ADC Capture Switch" as needed.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 sound/soc/codecs/rt5670.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/rt5670.c b/sound/soc/codecs/rt5670.c
index 0f372a748b0e..4d22fa4e8ab7 100644
--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -1652,12 +1652,10 @@ static const struct snd_soc_dapm_widget rt5670_dapm_widgets[] = {
 			    RT5670_PWR_ADC_S1F_BIT, 0, NULL, 0),
 	SND_SOC_DAPM_SUPPLY("ADC Stereo2 Filter", RT5670_PWR_DIG2,
 			    RT5670_PWR_ADC_S2F_BIT, 0, NULL, 0),
-	SND_SOC_DAPM_MIXER("Sto1 ADC MIXL", RT5670_STO1_ADC_DIG_VOL,
-			   RT5670_L_MUTE_SFT, 1, rt5670_sto1_adc_l_mix,
-			   ARRAY_SIZE(rt5670_sto1_adc_l_mix)),
-	SND_SOC_DAPM_MIXER("Sto1 ADC MIXR", RT5670_STO1_ADC_DIG_VOL,
-			   RT5670_R_MUTE_SFT, 1, rt5670_sto1_adc_r_mix,
-			   ARRAY_SIZE(rt5670_sto1_adc_r_mix)),
+	SND_SOC_DAPM_MIXER("Sto1 ADC MIXL", SND_SOC_NOPM, 0, 0,
+			   rt5670_sto1_adc_l_mix, ARRAY_SIZE(rt5670_sto1_adc_l_mix)),
+	SND_SOC_DAPM_MIXER("Sto1 ADC MIXR", SND_SOC_NOPM, 0, 0,
+			   rt5670_sto1_adc_r_mix, ARRAY_SIZE(rt5670_sto1_adc_r_mix)),
 	SND_SOC_DAPM_MIXER("Sto2 ADC MIXL", SND_SOC_NOPM, 0, 0,
 			   rt5670_sto2_adc_l_mix,
 			   ARRAY_SIZE(rt5670_sto2_adc_l_mix)),
-- 
2.30.1



More information about the Alsa-devel mailing list