[PATCH v2 2/2] ALSA: usb-audio: Add DJM-450 to the quirks table
Olivia Mackintosh
livvy at base.nu
Tue Feb 2 14:42:28 CET 2021
As with most Pioneer devices, the device descriptor is vendor specific
and as such, the number of channels, the PCM format, endpoints and
sample rate need to be specified. This device has 8 inputs and 8 outputs
and a sample rate of 48000 only. The PCM format is S24_3LE like other
devices.
There seems to be an appetite for reducing duplication amongs these
Pioneer patches but again, I feel this is a step to be taken after
support has been added as it's not completely clear where the
commonalities are.
Signed-off-by: Olivia Mackintosh <livvy at base.nu>
---
sound/usb/quirks-table.h | 57 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 93d55cd1a5a4..1165a5ac60f2 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3817,6 +3817,63 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
}
}
},
+{
+ /*
+ * Pioneer DJ DJM-450
+ * PCM is 8 channels out @ 48 fixed (endpoint 0x01)
+ * and 8 channels in @ 48 fixed (endpoint 0x82).
+ */
+ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0013),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .channels = 8, // outputs
+ .iface = 0,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x01,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC|
+ USB_ENDPOINT_SYNC_ASYNC,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 }
+ }
+ },
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .channels = 8, // inputs
+ .iface = 0,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x82,
+ .ep_idx = 1,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC|
+ USB_ENDPOINT_SYNC_ASYNC|
+ USB_ENDPOINT_USAGE_IMPLICIT_FB,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 }
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
#undef USB_DEVICE_VENDOR_SPEC
#undef USB_AUDIO_DEVICE
--
2.30.0
More information about the Alsa-devel
mailing list