[PATCH 4/6] soundwire: qcom: start the clock during initialization

[Vinod Koul]

On 29-01-21, 17:32, Srinivas Kandagatla wrote:
> Start the clock during initialization.

A detailed log please, which clock..? Also how do older controllers work
w/o this clk

> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> ---
>  drivers/soundwire/qcom.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index 3669bac11a32..83df15d83935 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -47,6 +47,8 @@
>  #define SWRM_MCP_FRAME_CTRL_BANK_ADDR(m)		(0x101C + 0x40 * (m))
>  #define SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK			GENMASK(2, 0)
>  #define SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK			GENMASK(7, 3)
> +#define SWRM_MCP_BUS_CTRL					0x1044
> +#define SWRM_MCP_BUS_CLK_START					BIT(1)
>  #define SWRM_MCP_CFG_ADDR					0x1048
>  #define SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK		GENMASK(21, 17)
>  #define SWRM_DEF_CMD_NO_PINGS					0x1f
> @@ -345,6 +347,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
>  	u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK);
>  	ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val);
>  
> +	ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
>  	/* Configure number of retries of a read/write cmd */
>  	if (ctrl->version_major == 1 && ctrl->version_minor >= 5 &&
>  	    ctrl->version_step >= 1) {
> -- 
> 2.21.0

-- 
~Vinod