[PATCH v1 1/2] kselftest: alsa: Factor out check that values meet constraints
Mark Brown
broonie at kernel.org
Fri Dec 17 14:02:12 CET 2021
To simplify the code a bit and allow future reuse factor the checks that
values we read are valid out of test_ctl_get_value() into a separate
function which can be reused later. As part of this extend the test to
check all the values for the control, not just the first one.
Signed-off-by: Mark Brown <broonie at kernel.org>
---
tools/testing/selftests/alsa/mixer-test.c | 141 +++++++++++++---------
1 file changed, 82 insertions(+), 59 deletions(-)
diff --git a/tools/testing/selftests/alsa/mixer-test.c b/tools/testing/selftests/alsa/mixer-test.c
index b798a76f6825..b009fc5df605 100644
--- a/tools/testing/selftests/alsa/mixer-test.c
+++ b/tools/testing/selftests/alsa/mixer-test.c
@@ -193,124 +193,147 @@ void find_controls(void)
snd_config_delete(config);
}
-/*
- * Check that we can read the default value and it is valid. Write
- * tests use the read value to restore the default.
- */
-void test_ctl_get_value(struct ctl_data *ctl)
+bool ctl_value_index_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val,
+ int index)
{
- int err;
long int_val;
long long int64_val;
- /* If the control is turned off let's be polite */
- if (snd_ctl_elem_info_is_inactive(ctl->info)) {
- ksft_print_msg("%s is inactive\n", ctl->name);
- ksft_test_result_skip("get_value.%d.%d\n",
- ctl->card->card, ctl->elem);
- return;
- }
-
- /* Can't test reading on an unreadable control */
- if (!snd_ctl_elem_info_is_readable(ctl->info)) {
- ksft_print_msg("%s is not readable\n", ctl->name);
- ksft_test_result_skip("get_value.%d.%d\n",
- ctl->card->card, ctl->elem);
- return;
- }
-
- err = snd_ctl_elem_read(ctl->card->handle, ctl->def_val);
- if (err < 0) {
- ksft_print_msg("snd_ctl_elem_read() failed: %s\n",
- snd_strerror(err));
- goto out;
- }
-
switch (snd_ctl_elem_info_get_type(ctl->info)) {
case SND_CTL_ELEM_TYPE_NONE:
- ksft_print_msg("%s Invalid control type NONE\n", ctl->name);
- err = -1;
- break;
+ ksft_print_msg("%s.%d Invalid control type NONE\n",
+ ctl->name, index);
+ return false;
case SND_CTL_ELEM_TYPE_BOOLEAN:
- int_val = snd_ctl_elem_value_get_boolean(ctl->def_val, 0);
+ int_val = snd_ctl_elem_value_get_boolean(val, index);
switch (int_val) {
case 0:
case 1:
break;
default:
- ksft_print_msg("%s Invalid boolean value %ld\n",
- ctl->name, int_val);
- err = -1;
- break;
+ ksft_print_msg("%s.%d Invalid boolean value %ld\n",
+ ctl->name, index, int_val);
+ return false;
}
break;
case SND_CTL_ELEM_TYPE_INTEGER:
- int_val = snd_ctl_elem_value_get_integer(ctl->def_val, 0);
+ int_val = snd_ctl_elem_value_get_integer(val, index);
if (int_val < snd_ctl_elem_info_get_min(ctl->info)) {
- ksft_print_msg("%s value %ld less than minimum %ld\n",
- ctl->name, int_val,
+ ksft_print_msg("%s.%d value %ld less than minimum %ld\n",
+ ctl->name, index, int_val,
snd_ctl_elem_info_get_min(ctl->info));
- err = -1;
+ return false;
}
if (int_val > snd_ctl_elem_info_get_max(ctl->info)) {
- ksft_print_msg("%s value %ld more than maximum %ld\n",
- ctl->name, int_val,
+ ksft_print_msg("%s.%d value %ld more than maximum %ld\n",
+ ctl->name, index, int_val,
snd_ctl_elem_info_get_max(ctl->info));
- err = -1;
+ return false;
}
/* Only check step size if there is one and we're in bounds */
- if (err >= 0 && snd_ctl_elem_info_get_step(ctl->info) &&
+ if (snd_ctl_elem_info_get_step(ctl->info) &&
(int_val - snd_ctl_elem_info_get_min(ctl->info) %
snd_ctl_elem_info_get_step(ctl->info))) {
- ksft_print_msg("%s value %ld invalid for step %ld minimum %ld\n",
- ctl->name, int_val,
+ ksft_print_msg("%s.%d value %ld invalid for step %ld minimum %ld\n",
+ ctl->name, index, int_val,
snd_ctl_elem_info_get_step(ctl->info),
snd_ctl_elem_info_get_min(ctl->info));
- err = -1;
+ return false;
}
break;
case SND_CTL_ELEM_TYPE_INTEGER64:
- int64_val = snd_ctl_elem_value_get_integer64(ctl->def_val, 0);
+ int64_val = snd_ctl_elem_value_get_integer64(val, index);
if (int64_val < snd_ctl_elem_info_get_min64(ctl->info)) {
- ksft_print_msg("%s value %lld less than minimum %lld\n",
- ctl->name, int64_val,
+ ksft_print_msg("%s.%d value %lld less than minimum %lld\n",
+ ctl->name, index, int64_val,
snd_ctl_elem_info_get_min64(ctl->info));
- err = -1;
+ return false;
}
if (int64_val > snd_ctl_elem_info_get_max64(ctl->info)) {
- ksft_print_msg("%s value %lld more than maximum %lld\n",
- ctl->name, int64_val,
+ ksft_print_msg("%s.%d value %lld more than maximum %lld\n",
+ ctl->name, index, int64_val,
snd_ctl_elem_info_get_max(ctl->info));
- err = -1;
+ return false;
}
/* Only check step size if there is one and we're in bounds */
- if (err >= 0 && snd_ctl_elem_info_get_step64(ctl->info) &&
+ if (snd_ctl_elem_info_get_step64(ctl->info) &&
(int64_val - snd_ctl_elem_info_get_min64(ctl->info)) %
snd_ctl_elem_info_get_step64(ctl->info)) {
- ksft_print_msg("%s value %lld invalid for step %lld minimum %lld\n",
- ctl->name, int64_val,
+ ksft_print_msg("%s.%d value %lld invalid for step %lld minimum %lld\n",
+ ctl->name, index, int64_val,
snd_ctl_elem_info_get_step64(ctl->info),
snd_ctl_elem_info_get_min64(ctl->info));
- err = -1;
+ return false;
}
break;
default:
/* No tests for other types */
+ break;
+ }
+
+ return true;
+}
+
+/*
+ * Check that the provided value meets the constraints for the
+ * provided control.
+ */
+bool ctl_value_valid(struct ctl_data *ctl, snd_ctl_elem_value_t *val)
+{
+ int i;
+ bool valid = true;
+
+ for (i = 0; i < snd_ctl_elem_info_get_count(ctl->info); i++)
+ if (!ctl_value_index_valid(ctl, val, i))
+ valid = false;
+
+ return valid;
+}
+
+/*
+ * Check that we can read the default value and it is valid. Write
+ * tests use the read value to restore the default.
+ */
+void test_ctl_get_value(struct ctl_data *ctl)
+{
+ int err;
+
+ /* If the control is turned off let's be polite */
+ if (snd_ctl_elem_info_is_inactive(ctl->info)) {
+ ksft_print_msg("%s is inactive\n", ctl->name);
+ ksft_test_result_skip("get_value.%d.%d\n",
+ ctl->card->card, ctl->elem);
+ return;
+ }
+
+ /* Can't test reading on an unreadable control */
+ if (!snd_ctl_elem_info_is_readable(ctl->info)) {
+ ksft_print_msg("%s is not readable\n", ctl->name);
ksft_test_result_skip("get_value.%d.%d\n",
ctl->card->card, ctl->elem);
return;
}
+ err = snd_ctl_elem_read(ctl->card->handle, ctl->def_val);
+ if (err < 0) {
+ ksft_print_msg("snd_ctl_elem_read() failed: %s\n",
+ snd_strerror(err));
+ goto out;
+ }
+
+ if (!ctl_value_valid(ctl, ctl->def_val))
+ err = -EINVAL;
+
out:
ksft_test_result(err >= 0, "get_value.%d.%d\n",
ctl->card->card, ctl->elem);
--
2.30.2
More information about the Alsa-devel
mailing list