[PATCH v4 20/22] ARM: tegra: Add HDMI audio graph to Tegra20 device-tree

[Dmitry Osipenko]

16.12.2021 16:46, Thierry Reding пишет:
> On Sat, Dec 04, 2021 at 05:37:23PM +0300, Dmitry Osipenko wrote:
>> Add HDMI audio graph to Tegra20 device-tree to enable HDMI audio on
>> Tegra20 devices.
>>
>> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
>> ---
>>  arch/arm/boot/dts/tegra20.dtsi | 22 +++++++++++++++++++++-
>>  1 file changed, 21 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
>> index 72cbe32d0c1d..dde228bcbbff 100644
>> --- a/arch/arm/boot/dts/tegra20.dtsi
>> +++ b/arch/arm/boot/dts/tegra20.dtsi
>> @@ -186,7 +186,7 @@ rgb {
>>  			};
>>  		};
>>  
>> -		hdmi at 54280000 {
>> +		tegra_hdmi: hdmi at 54280000 {
>>  			compatible = "nvidia,tegra20-hdmi";
>>  			reg = <0x54280000 0x00040000>;
>>  			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
>> @@ -1063,4 +1063,24 @@ pmu {
>>  		interrupt-affinity = <&{/cpus/cpu at 0}>,
>>  				     <&{/cpus/cpu at 1}>;
>>  	};
>> +
>> +	sound-hdmi {
>> +		compatible = "simple-audio-card";
>> +		simple-audio-card,name = "NVIDIA Tegra20 HDMI";
>> +
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		simple-audio-card,dai-link at 0 {
>> +			reg = <0>;
>> +
>> +			cpu {
>> +				sound-dai = <&tegra_spdif>;
>> +			};
>> +
>> +			codec {
>> +				sound-dai = <&tegra_hdmi>;
>> +			};
>> +		};
>> +	};
> 
> Should this be status = "disabled" and then only enabled for platforms
> that actually enable HDMI?

Assuming that HDMI node is disabled, we assume that the card won't be
initialized. It won't be a problem to restructure this card in DT later
on if we will have any other use-cases than we currently have, but this
is unlikely to happen in practice.