[PATCH v2 1/1] ASoC: rt5682s: Add dapm switch to mute/unmute HP playback output

[Ajit Kumar Pandey]

On 12/9/2021 7:55 AM, Shuming [范書銘] wrote:
> [CAUTION: External Email]
> 
>> Subject: [PATCH v2 1/1] ASoC: rt5682s: Add dapm switch to mute/unmute HP
>> playback output
>>
>> Add dapm switch in playback path to mute or unmute HP output data.
>> We will set and reset MUTE_SFT bit in RT5682S_HP_CTRL_1 register based on
>> switch value to mute or unmute respective channel.
>>
>> Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey at amd.com>
>> ---
>>   sound/soc/codecs/rt5682s.c | 19 +++++++++++++++++--
>>   1 file changed, 17 insertions(+), 2 deletions(-)
>>
>> diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index
>> d49a4f68566d..21ab5f7df422 100644
>> --- a/sound/soc/codecs/rt5682s.c
>> +++ b/sound/soc/codecs/rt5682s.c
>> @@ -1573,6 +1573,14 @@ static const char * const
>> rt5682s_adcdat_pin_select[] = {
>>        "ADCDAT1", "ADCDAT2",
>>   };
>>
>> +/* Out Switch */
>> +static const struct snd_kcontrol_new hpol_switch =
>> +     SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5682S_HP_CTRL_1,
>> +             RT5682S_L_MUTE_SFT, 1, 1);
>> +static const struct snd_kcontrol_new hpor_switch =
>> +     SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5682S_HP_CTRL_1,
>> +             RT5682S_R_MUTE_SFT, 1, 1);
>> +
>>   static SOC_VALUE_ENUM_SINGLE_DECL(rt5682s_adcdat_pin_enum,
>>        RT5682S_GPIO_CTRL_1, RT5682S_GP4_PIN_SFT,
>> RT5682S_GP4_PIN_MASK,
>>        rt5682s_adcdat_pin_select, rt5682s_adcdat_pin_values); @@ -1746,6
>> +1754,11 @@ static const struct snd_soc_dapm_widget
>> rt5682s_dapm_widgets[] = {
>>        SND_SOC_DAPM_PGA_S("HP Amp", 1, SND_SOC_NOPM, 0, 0,
>> rt5682s_hp_amp_event,
>>                SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_POST_PMU),
>>
>> +     SND_SOC_DAPM_SWITCH("HPOL Playback", SND_SOC_NOPM, 0, 0,
>> +             &hpol_switch),
>> +     SND_SOC_DAPM_SWITCH("HPOR Playback", SND_SOC_NOPM, 0, 0,
>> +             &hpor_switch),
>> +
>>        /* CLK DET */
>>        SND_SOC_DAPM_SUPPLY("CLKDET SYS", RT5682S_CLK_DET,
>>                RT5682S_SYS_CLK_DET_SFT, 0, NULL, 0), @@ -1895,8 +1908,10 @@
>> static const struct snd_soc_dapm_route rt5682s_dapm_routes[] = {
>>        {"HP Amp", NULL, "CLKDET SYS"},
>>        {"HP Amp", NULL, "SAR"},
>>
>> -     {"HPOL", NULL, "HP Amp"},
>> -     {"HPOR", NULL, "HP Amp"},
>> +     {"HPOL Playback", "Switch", "HP Amp"},
>> +     {"HPOR Playback", "Switch", "HP Amp"},
>> +     {"HPOL", NULL, "HPOL Playback"},
>> +     {"HPOR", NULL, "HPOR Playback"},
>>   };
> 
> RT5682S enables the 1 bit control for HP output.
> Therefore, the setting of RT5682S_HP_CTRL_1[15][7] will be not effective.
> 
>
Ok, it was actually effective and muted audio when we test in our 
platform, possible because i'm tearing down dapm path based on switch
value. If we don't have register bits available to mute i'll resubmit 
the change with virtual switch widget to disable DAPM and stop audio.