[PATCH v5 2/5] dt-bindings: pinctrl: qcom: Add sc7280 lpass lpi pinctrl bindings

[Srinivas Kandagatla]

On 07/12/2021 15:35, Srinivasa Rao Mandadapu wrote:
> Add device tree binding Documentation details for Qualcomm SC7280
> LPASS LPI pinctrl driver.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam at quicinc.com>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu at quicinc.com>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu at quicinc.com>
> ---


I remember in my previous review that I requested you to use git mv for 
renaming this

If you do that you will endup diff stat something like this:

------------------------->cut<-----------------------------
diff --git 
a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml 
b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
similarity index 97%
rename from 
Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
rename to 
Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
index e47ebf934daf..76f205a47640 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
+++ 
b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -1,7 +1,7 @@
  # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
  %YAML 1.2
  ---
-$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#
+$id: 
http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
  $schema: http://devicetree.org/meta-schemas/core.yaml#

  title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
------------------------->cut<-----------------------------

--srini

>   .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml     | 115 +++++++++++++++++++++
>   1 file changed, 115 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
> new file mode 100644
> index 0000000..d32ee32
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
> +  Low Power Island (LPI) TLMM block
> +
> +maintainers:
> +  - Srinivasa Rao Mandadapu <srivasam at codeaurora.org>
> +  - Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer block found in the
> +  LPASS LPI IP on most Qualcomm SoCs
> +
> +properties:
> +  compatible:
> +    const: qcom,sc7280-lpass-lpi-pinctrl
> +
> +  reg:
> +    minItems: 2
> +    maxItems: 2
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    description: Specifying the pin number and flags, as defined in
> +      include/dt-bindings/gpio/gpio.h
> +    const: 2
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> +  '-pins$':
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-9][0-9])$"
> +        minItems: 1
> +        maxItems: 15
> +
> +      function:
> +        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
> +                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
> +                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
> +                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
> +                dmic3_data, i2s2_data ]
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +      drive-strength:
> +        enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +        default: 2
> +        description:
> +          Selects the drive strength for the specified pins, in mA.
> +
> +      slew-rate:
> +        enum: [0, 1, 2, 3]
> +        default: 0
> +        description: |
> +            0: No adjustments
> +            1: Higher Slew rate (faster edges)
> +            2: Lower Slew rate (slower edges)
> +            3: Reserved (No adjustments)
> +
> +      bias-pull-down: true
> +
> +      bias-pull-up: true
> +
> +      bias-disable: true
> +
> +      output-high: true
> +
> +      output-low: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    lpass_tlmm: pinctrl at 33c0000 {
> +        compatible = "qcom,sc7280-lpass-lpi-pinctrl";
> +        reg = <0x33c0000 0x20000>,
> +              <0x3550000 0x10000>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        gpio-ranges = <&lpass_tlmm 0 0 15>;
> +    };
>