[PATCH v4 5/5] pinctrl: qcom: Add SC7280 lpass pin configuration

Bjorn Andersson bjorn.andersson at linaro.org
Mon Dec 6 17:25:04 CET 2021


On Fri 03 Dec 05:32 CST 2021, Srinivasa Rao Mandadapu wrote:

> From: Srinivasa Rao Mandadapu <srivasam at codeaurora.org>
> 
> Add pin control support for SC7280 LPASS LPI.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <srivasam at codeaurora.org>
> Co-developed-by: Venkata Prasad Potturu <potturu at codeaurora.org>
> Signed-off-by: Venkata Prasad Potturu <potturu at codeaurora.org>
> ---
>  drivers/pinctrl/qcom/Kconfig                    |   8 ++
>  drivers/pinctrl/qcom/Makefile                   |   1 +
>  drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 169 ++++++++++++++++++++++++
>  3 files changed, 178 insertions(+)
>  create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
> 
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index e750e10..37fe868 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -328,4 +328,12 @@ config PINCTRL_SM8250_LPASS_LPI
>  	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
>  	  (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
>  
> +config PINCTRL_SC7280_LPASS_LPI
> +	tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"

You misspelled SC7280 here.

> +	depends on PINCTRL_LPASS_LPI
> +	help
> +	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> +	  Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
> +	  (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform.
> +
>  endif
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index 8bc877e..6c3ddaf 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -38,3 +38,4 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
>  obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
>  obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
>  obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
> +obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o

Please keep these entries sorted alphabetically, same with Kconfig.

Regards,
Bjorn

> diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
> new file mode 100644
> index 0000000..94bec15
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c
> @@ -0,0 +1,169 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
> + * ALSA SoC platform-machine driver for QTi LPASS
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "pinctrl-lpass-lpi.h"
> +
> +enum lpass_lpi_functions {
> +	LPI_MUX_dmic1_clk,
> +	LPI_MUX_dmic1_data,
> +	LPI_MUX_dmic2_clk,
> +	LPI_MUX_dmic2_data,
> +	LPI_MUX_dmic3_clk,
> +	LPI_MUX_dmic3_data,
> +	LPI_MUX_i2s1_clk,
> +	LPI_MUX_i2s1_data,
> +	LPI_MUX_i2s1_ws,
> +	LPI_MUX_i2s2_clk,
> +	LPI_MUX_i2s2_data,
> +	LPI_MUX_i2s2_ws,
> +	LPI_MUX_qua_mi2s_data,
> +	LPI_MUX_qua_mi2s_sclk,
> +	LPI_MUX_qua_mi2s_ws,
> +	LPI_MUX_swr_rx_clk,
> +	LPI_MUX_swr_rx_data,
> +	LPI_MUX_swr_tx_clk,
> +	LPI_MUX_swr_tx_data,
> +	LPI_MUX_wsa_swr_clk,
> +	LPI_MUX_wsa_swr_data,
> +	LPI_MUX_gpio,
> +	LPI_MUX__,
> +};
> +
> +static const unsigned int gpio0_pins[] = { 0 };
> +static const unsigned int gpio1_pins[] = { 1 };
> +static const unsigned int gpio2_pins[] = { 2 };
> +static const unsigned int gpio3_pins[] = { 3 };
> +static const unsigned int gpio4_pins[] = { 4 };
> +static const unsigned int gpio5_pins[] = { 5 };
> +static const unsigned int gpio6_pins[] = { 6 };
> +static const unsigned int gpio7_pins[] = { 7 };
> +static const unsigned int gpio8_pins[] = { 8 };
> +static const unsigned int gpio9_pins[] = { 9 };
> +static const unsigned int gpio10_pins[] = { 10 };
> +static const unsigned int gpio11_pins[] = { 11 };
> +static const unsigned int gpio12_pins[] = { 12 };
> +static const unsigned int gpio13_pins[] = { 13 };
> +static const unsigned int gpio14_pins[] = { 14 };
> +
> +/* sc7280 variant specific data */
> +static const struct pinctrl_pin_desc sc7280_lpi_pins[] = {
> +	PINCTRL_PIN(0, "gpio0"),
> +	PINCTRL_PIN(1, "gpio1"),
> +	PINCTRL_PIN(2, "gpio2"),
> +	PINCTRL_PIN(3, "gpio3"),
> +	PINCTRL_PIN(4, "gpio4"),
> +	PINCTRL_PIN(5, "gpio5"),
> +	PINCTRL_PIN(6, "gpio6"),
> +	PINCTRL_PIN(7, "gpio7"),
> +	PINCTRL_PIN(8, "gpio8"),
> +	PINCTRL_PIN(9, "gpio9"),
> +	PINCTRL_PIN(10, "gpio10"),
> +	PINCTRL_PIN(11, "gpio11"),
> +	PINCTRL_PIN(12, "gpio12"),
> +	PINCTRL_PIN(13, "gpio13"),
> +	PINCTRL_PIN(14, "gpio14"),
> +};
> +
> +static const char * const swr_tx_clk_groups[] = { "gpio0" };
> +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" };
> +static const char * const swr_rx_clk_groups[] = { "gpio3" };
> +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
> +static const char * const dmic1_clk_groups[] = { "gpio6" };
> +static const char * const dmic1_data_groups[] = { "gpio7" };
> +static const char * const dmic2_clk_groups[] = { "gpio8" };
> +static const char * const dmic2_data_groups[] = { "gpio9" };
> +static const char * const i2s2_clk_groups[] = { "gpio10" };
> +static const char * const i2s2_ws_groups[] = { "gpio11" };
> +static const char * const dmic3_clk_groups[] = { "gpio12" };
> +static const char * const dmic3_data_groups[] = { "gpio13" };
> +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
> +static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
> +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
> +static const char * const i2s1_clk_groups[] = { "gpio6" };
> +static const char * const i2s1_ws_groups[] = { "gpio7" };
> +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
> +static const char * const wsa_swr_clk_groups[] = { "gpio10" };
> +static const char * const wsa_swr_data_groups[] = { "gpio11" };
> +static const char * const i2s2_data_groups[] = { "gpio12", "gpio13" };
> +
> +static const struct lpi_pingroup sc7280_groups[] = {
> +	LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
> +	LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
> +	LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
> +	LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
> +	LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
> +	LPI_PINGROUP(5, 12, swr_rx_data, _, _, _),
> +	LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
> +	LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
> +	LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
> +	LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
> +	LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
> +	LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
> +	LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
> +	LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
> +	LPI_PINGROUP(14, 6, swr_tx_data, _, _, _),
> +};
> +
> +static const struct lpi_function sc7280_functions[] = {
> +	LPI_FUNCTION(dmic1_clk),
> +	LPI_FUNCTION(dmic1_data),
> +	LPI_FUNCTION(dmic2_clk),
> +	LPI_FUNCTION(dmic2_data),
> +	LPI_FUNCTION(dmic3_clk),
> +	LPI_FUNCTION(dmic3_data),
> +	LPI_FUNCTION(i2s1_clk),
> +	LPI_FUNCTION(i2s1_data),
> +	LPI_FUNCTION(i2s1_ws),
> +	LPI_FUNCTION(i2s2_clk),
> +	LPI_FUNCTION(i2s2_data),
> +	LPI_FUNCTION(i2s2_ws),
> +	LPI_FUNCTION(qua_mi2s_data),
> +	LPI_FUNCTION(qua_mi2s_sclk),
> +	LPI_FUNCTION(qua_mi2s_ws),
> +	LPI_FUNCTION(swr_rx_clk),
> +	LPI_FUNCTION(swr_rx_data),
> +	LPI_FUNCTION(swr_tx_clk),
> +	LPI_FUNCTION(swr_tx_data),
> +	LPI_FUNCTION(wsa_swr_clk),
> +	LPI_FUNCTION(wsa_swr_data),
> +};
> +
> +static const struct lpi_pinctrl_variant_data sc7280_lpi_data = {
> +	.pins = sc7280_lpi_pins,
> +	.npins = ARRAY_SIZE(sc7280_lpi_pins),
> +	.groups = sc7280_groups,
> +	.ngroups = ARRAY_SIZE(sc7280_groups),
> +	.functions = sc7280_functions,
> +	.nfunctions = ARRAY_SIZE(sc7280_functions),
> +};
> +
> +static const struct of_device_id lpi_pinctrl_of_match[] = {
> +	{
> +	       .compatible = "qcom,sc7280-lpass-lpi-pinctrl",
> +	       .data = &sc7280_lpi_data,
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
> +
> +static struct platform_driver lpi_pinctrl_driver = {
> +	.driver = {
> +		   .name = "qcom-sc7280-lpass-lpi-pinctrl",
> +		   .of_match_table = lpi_pinctrl_of_match,
> +	},
> +	.probe = lpi_pinctrl_probe,
> +	.remove = lpi_pinctrl_remove,
> +};
> +
> +module_platform_driver(lpi_pinctrl_driver);
> +MODULE_DESCRIPTION("QTI SC7280 LPI GPIO pin control driver");
> +MODULE_LICENSE("GPL");
> +
> -- 
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
> 


More information about the Alsa-devel mailing list