[PATCH v3 3/5] pinctrl: qcom: Move chip specific functions to right files

[Srinivas Kandagatla]

On 01/12/2021 14:33, Srinivasa Rao Mandadapu wrote:
>>
>>
>>> +enum lpass_lpi_functions {
>>> +    LPI_MUX_dmic1_clk,
>>> +    LPI_MUX_dmic1_data,
>>> +    LPI_MUX_dmic2_clk,
>>> +    LPI_MUX_dmic2_data,
>>> +    LPI_MUX_dmic3_clk,
>>> +    LPI_MUX_dmic3_data,
>>> +    LPI_MUX_i2s1_clk,
>>> +    LPI_MUX_i2s1_data,
>>> +    LPI_MUX_i2s1_ws,
>>> +    LPI_MUX_i2s2_clk,
>>> +    LPI_MUX_i2s2_data,
>>> +    LPI_MUX_i2s2_ws,
>>> +    LPI_MUX_qua_mi2s_data,
>>> +    LPI_MUX_qua_mi2s_sclk,
>>> +    LPI_MUX_qua_mi2s_ws,
>>> +    LPI_MUX_swr_rx_clk,
>>> +    LPI_MUX_swr_rx_data,
>>> +    LPI_MUX_swr_tx_clk,
>>> +    LPI_MUX_swr_tx_data,
>>> +    LPI_MUX_wsa_swr_clk,
>>> +    LPI_MUX_wsa_swr_data,
>>> +    LPI_MUX_gpio,
>>> +    LPI_MUX__,
>>> +};
>>> +
>>> +static const unsigned int gpio0_pins[] = { 0 };
>>> +static const unsigned int gpio1_pins[] = { 1 };
>>> +static const unsigned int gpio2_pins[] = { 2 };
>>> +static const unsigned int gpio3_pins[] = { 3 };
>>> +static const unsigned int gpio4_pins[] = { 4 };
>>> +static const unsigned int gpio5_pins[] = { 5 };
>>> +static const unsigned int gpio6_pins[] = { 6 };
>>> +static const unsigned int gpio7_pins[] = { 7 };
>>> +static const unsigned int gpio8_pins[] = { 8 };
>>> +static const unsigned int gpio9_pins[] = { 9 };
>>> +static const unsigned int gpio10_pins[] = { 10 };
>>> +static const unsigned int gpio11_pins[] = { 11 };
>>> +static const unsigned int gpio12_pins[] = { 12 };
>>> +static const unsigned int gpio13_pins[] = { 13 };
>> >>>
>> to here are specific to sm8250, so it should not be in header file to 
>> start with.
> 
> As these are common to all lpass variants.. I feel it's better to keep 
> in Header file.

You realize that every include of this file will add these static 
variables to file, in this case to pinctrl-lpass-lpi.c, 
pinctrl-sm8250-lpass-lpi.c and pinctrl-sc7280-lpass-lpi.c
so in first file(pinctrl-lpass-lpi.c) you never use those variables in 
second file (pinctrl-sm8250-lpass-lpi.c)you only use up to gpio13 and in 
third file pinctrl-sc7280-lpass-lpi.c you could use them.

so its really bad idea to add static variables in header files.

--srini

> 
> And if new pins comes in later variants, we can add them incrementally, 
> and they will not impact existing pin numbers.
> 
> I think in upcoming variants number of pins will not decrease.
>