[PATCH v3 3/5] pinctrl: qcom: Move chip specific functions to right files
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Wed Dec 1 11:41:25 CET 2021
On 29/11/2021 09:58, Srinivasa Rao Mandadapu wrote:
> Update lpass lpi pin control driver to accommodate new lpass variant
> SoC specific drivers.
> Move sm8250 SoC specific functions to pinctrl-sm8250-lpass-lpi.c file
> and common declarations to pinctrl-lpass-lpi.h header file.
>
> Signed-off-by: Srinivasa Rao Mandadapu <srivasam at codeaurora.org>
> Co-developed-by: Venkata Prasad Potturu <potturu at codeaurora.org>
> Signed-off-by: Venkata Prasad Potturu <potturu at codeaurora.org>
> ---
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 251 +-----------------------
> drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 139 +++++++++++++
> drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 125 ++++++++++++
> 4 files changed, 271 insertions(+), 245 deletions(-)
> create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
> create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
>
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index 7a12e8c..74568cf 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -37,3 +37,4 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
> obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
> obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
> obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
> +obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
This is confusing, either we make new
CONFIG_PINCTRL_SM8250_LPASS_LPI here and use it for
pinctrl-sm8250-lpass-lpi.o
> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> index 2f19ab4..2641489 100644
> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> @@ -4,237 +4,16 @@
> * Copyright (c) 2020 Linaro Ltd.
> */
>
> -#include <linux/bitops.h>
> -#include <linux/bitfield.h>
Looks like some of these are removed without a reason.
> #include <linux/clk.h>
> #include <linux/gpio/driver.h>
> -#include <linux/io.h>
> -#include <linux/module.h>
> #include <linux/of_device.h>
> -#include <linux/of.h>
> #include <linux/pinctrl/pinconf-generic.h>
> #include <linux/pinctrl/pinconf.h>
> #include <linux/pinctrl/pinmux.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
> -#include <linux/types.h>
> #include "../core.h"
> #include "../pinctrl-utils.h"
> +#include "pinctrl-lpass-lpi.h"
...
> -
> -module_platform_driver(lpi_pinctrl_driver);
> -MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
> -MODULE_LICENSE("GPL");
if you build this as Modules your build would fail without MODULE_LICENSE().
> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
> new file mode 100644
> index 0000000..b0afb40
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
> @@ -0,0 +1,139 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020 Linaro Ltd.
> + */
> +#ifndef __PINCTRL_LPASS_LPI_H__
> +#define __PINCTRL_LPASS_LPI_H__
> +
> +#define LPI_SLEW_RATE_CTL_REG 0xa000
> +#define LPI_TLMM_REG_OFFSET 0x1000
> +#define LPI_SLEW_RATE_MAX 0x03
> +#define LPI_SLEW_BITS_SIZE 0x02
> +#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
> +#define LPI_GPIO_CFG_REG 0x00
> +#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
> +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
> +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
> +#define LPI_GPIO_OE_MASK BIT(9)
> +#define LPI_GPIO_VALUE_REG 0x04
> +#define LPI_GPIO_VALUE_IN_MASK BIT(0)
> +#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
> +
> +#define LPI_GPIO_BIAS_DISABLE 0x0
> +#define LPI_GPIO_PULL_DOWN 0x1
> +#define LPI_GPIO_KEEPER 0x2
> +#define LPI_GPIO_PULL_UP 0x3
> +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
> +#define NO_SLEW -1
> +
> +#define LPI_FUNCTION(fname) \
> + [LPI_MUX_##fname] = { \
> + .name = #fname, \
> + .groups = fname##_groups, \
> + .ngroups = ARRAY_SIZE(fname##_groups), \
> + }
> +
> +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
> + { \
> + .name = "gpio" #id, \
> + .pins = gpio##id##_pins, \
> + .pin = id, \
> + .slew_offset = soff, \
> + .npins = ARRAY_SIZE(gpio##id##_pins), \
> + .funcs = (int[]){ \
> + LPI_MUX_gpio, \
> + LPI_MUX_##f1, \
> + LPI_MUX_##f2, \
> + LPI_MUX_##f3, \
> + LPI_MUX_##f4, \
> + }, \
> + .nfuncs = 5, \
> + }
> +
> +struct lpi_pingroup {
> + const char *name;
> + const unsigned int *pins;
> + unsigned int npins;
> + unsigned int pin;
> + /* Bit offset in slew register for SoundWire pins only */
> + int slew_offset;
> + unsigned int *funcs;
> + unsigned int nfuncs;
> +};
> +
> +struct lpi_function {
> + const char *name;
> + const char * const *groups;
> + unsigned int ngroups;
> +};
> +
> +struct lpi_pinctrl_variant_data {
> + const struct pinctrl_pin_desc *pins;
> + int npins;
> + const struct lpi_pingroup *groups;
> + int ngroups;
> + const struct lpi_function *functions;
> + int nfunctions;
> +};
> +
> +#define MAX_LPI_NUM_CLKS 2
> +
> +struct lpi_pinctrl {
> + struct device *dev;
> + struct pinctrl_dev *ctrl;
> + struct gpio_chip chip;
> + struct pinctrl_desc desc;
> + char __iomem *tlmm_base;
> + char __iomem *slew_base;
> + struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
> + struct mutex slew_access_lock;
> + const struct lpi_pinctrl_variant_data *data;
> +};
> +
From here
<<<
> +enum lpass_lpi_functions {
> + LPI_MUX_dmic1_clk,
> + LPI_MUX_dmic1_data,
> + LPI_MUX_dmic2_clk,
> + LPI_MUX_dmic2_data,
> + LPI_MUX_dmic3_clk,
> + LPI_MUX_dmic3_data,
> + LPI_MUX_i2s1_clk,
> + LPI_MUX_i2s1_data,
> + LPI_MUX_i2s1_ws,
> + LPI_MUX_i2s2_clk,
> + LPI_MUX_i2s2_data,
> + LPI_MUX_i2s2_ws,
> + LPI_MUX_qua_mi2s_data,
> + LPI_MUX_qua_mi2s_sclk,
> + LPI_MUX_qua_mi2s_ws,
> + LPI_MUX_swr_rx_clk,
> + LPI_MUX_swr_rx_data,
> + LPI_MUX_swr_tx_clk,
> + LPI_MUX_swr_tx_data,
> + LPI_MUX_wsa_swr_clk,
> + LPI_MUX_wsa_swr_data,
> + LPI_MUX_gpio,
> + LPI_MUX__,
> +};
> +
> +static const unsigned int gpio0_pins[] = { 0 };
> +static const unsigned int gpio1_pins[] = { 1 };
> +static const unsigned int gpio2_pins[] = { 2 };
> +static const unsigned int gpio3_pins[] = { 3 };
> +static const unsigned int gpio4_pins[] = { 4 };
> +static const unsigned int gpio5_pins[] = { 5 };
> +static const unsigned int gpio6_pins[] = { 6 };
> +static const unsigned int gpio7_pins[] = { 7 };
> +static const unsigned int gpio8_pins[] = { 8 };
> +static const unsigned int gpio9_pins[] = { 9 };
> +static const unsigned int gpio10_pins[] = { 10 };
> +static const unsigned int gpio11_pins[] = { 11 };
> +static const unsigned int gpio12_pins[] = { 12 };
> +static const unsigned int gpio13_pins[] = { 13 };
>>>
to here are specific to sm8250, so it should not be in header file to
start with.
> +
> +int lpi_pinctrl_probe(struct platform_device *pdev);
> +int lpi_pinctrl_remove(struct platform_device *pdev);
> +
> +#endif /*__PINCTRL_LPASS_LPI_H__*/
> +
> diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
> new file mode 100644
> index 0000000..3eba8b3
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
> @@ -0,0 +1,125 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
...
> +
> +static struct platform_driver lpi_pinctrl_driver = {
> + .driver = {
> + .name = "qcom-sm8250-lpass-lpi-pinctrl",
> + .of_match_table = lpi_pinctrl_of_match,
> + },
> + .probe = lpi_pinctrl_probe,
> + .remove = lpi_pinctrl_remove,
> +};
> +
> +module_platform_driver(lpi_pinctrl_driver);
> +MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
may be :
"SM8250 LPI GPIO pin control driver"
--srini
> +MODULE_LICENSE("GPL");
> +
>
More information about the Alsa-devel
mailing list