[PATCH] ASoC: rt5640: Fix the wrong state of the JD in the HDA header
Oder Chiou
oder_chiou at realtek.com
Wed Dec 1 10:56:29 CET 2021
The patch fixes the wrong state of the JD with 1M pull up resistor in the
HDA header.
Signed-off-by: Oder Chiou <oder_chiou at realtek.com>
---
sound/soc/codecs/rt5640.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c
index 08b37878cb00..f3659b14c74e 100644
--- a/sound/soc/codecs/rt5640.c
+++ b/sound/soc/codecs/rt5640.c
@@ -1973,7 +1973,7 @@ static int rt5640_set_bias_level(struct snd_soc_component *component,
RT5640_PWR_FV1 | RT5640_PWR_FV2,
RT5640_PWR_FV1 | RT5640_PWR_FV2);
snd_soc_component_update_bits(component, RT5640_DUMMY1,
- 0x0301, 0x0301);
+ 0x1, 0x1);
snd_soc_component_update_bits(component, RT5640_MICBIAS,
0x0030, 0x0030);
}
@@ -2533,7 +2533,7 @@ static void rt5640_enable_hda_jack_detect(
snd_soc_component_update_bits(component, RT5640_GPIO_CTRL3,
RT5640_GP1_PF_MASK, RT5640_GP1_PF_OUT);
- snd_soc_component_update_bits(component, RT5640_DUMMY1, 0x700, 0x300);
+ snd_soc_component_update_bits(component, RT5640_DUMMY1, 0x400, 0x0);
rt5640->jack = jack;
@@ -2651,13 +2651,16 @@ static int rt5640_probe(struct snd_soc_component *component)
if (device_property_read_u32(component->dev,
"realtek,jack-detect-source", &val) == 0) {
- if (val <= RT5640_JD_SRC_GPIO4)
+ if (val <= RT5640_JD_SRC_GPIO4) {
rt5640->jd_src = val << RT5640_JD_SFT;
- else if (val == RT5640_JD_SRC_HDA_HEADER)
+ } else if (val == RT5640_JD_SRC_HDA_HEADER) {
rt5640->jd_src = RT5640_JD_SRC_HDA_HEADER;
- else
+ snd_soc_component_update_bits(component, RT5640_DUMMY1,
+ 0x0300, 0x0);
+ } else {
dev_warn(component->dev, "Warning: Invalid jack-detect-source value: %d, leaving jack-detect disabled\n",
val);
+ }
}
if (!device_property_read_bool(component->dev, "realtek,jack-detect-not-inverted"))
--
2.34.1
More information about the Alsa-devel
mailing list