[PATCH 04/13] ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules
Rob Herring
robh at kernel.org
Tue Aug 31 22:21:33 CEST 2021
On Fri, Aug 27, 2021 at 03:03:50PM +0530, Sameer Pujar wrote:
> This patch adds YAML schema for DT bindings of few AHUB modules.
> These devices will be registered as ASoC components and bindings
> will be used on Tegra210 and later chips. The bindings for below
> mentioned modules are added:
>
> * SFC (Sampling Frequency Converter)
> * MVC (Master Volume Control)
> * AMX (Audio Multiplexer)
> * ADX (Audio Demultiplexer)
> * Mixer
>
> Signed-off-by: Sameer Pujar <spujar at nvidia.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> ---
> .../bindings/sound/nvidia,tegra210-adx.yaml | 74 ++++++++++++++++++++
> .../bindings/sound/nvidia,tegra210-ahub.yaml | 20 ++++++
> .../bindings/sound/nvidia,tegra210-amx.yaml | 72 ++++++++++++++++++++
> .../bindings/sound/nvidia,tegra210-mixer.yaml | 67 ++++++++++++++++++
> .../bindings/sound/nvidia,tegra210-mvc.yaml | 79 ++++++++++++++++++++++
> .../bindings/sound/nvidia,tegra210-sfc.yaml | 76 +++++++++++++++++++++
> 6 files changed, 388 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
> create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
> create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
> create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
> create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
> new file mode 100644
> index 0000000..9950585
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml
> @@ -0,0 +1,74 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-adx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Tegra210 ADX Device Tree Bindings
> +
> +description: |
> + The Audio Demultiplexer (ADX) block takes an input stream with up to
extra spaces.
> + 16 channels and demultiplexes it into four output streams of up to 16
> + channels each. A byte RAM helps to form output frames by any combination
> + of bytes from the input frame. Its design is identical to that of byte
> + RAM in the AMX except that the data flow direction is reversed.
> +
> +maintainers:
> + - Jon Hunter <jonathanh at nvidia.com>
> + - Mohan Kumar <mkumard at nvidia.com>
> + - Sameer Pujar <spujar at nvidia.com>
> +
> +properties:
> + $nodename:
> + pattern: "^adx@[0-9a-f]*$"
> +
> + compatible:
> + oneOf:
> + - const: nvidia,tegra210-adx
> + - items:
> + - enum:
> + - nvidia,tegra194-adx
> + - nvidia,tegra186-adx
> + - const: nvidia,tegra210-adx
> +
> + reg:
> + maxItems: 1
> +
> + sound-name-prefix:
nvidia,sound-name-prefix
> + pattern: "^ADX[1-9]$"
> + $ref: /schemas/types.yaml#/definitions/string
> + description:
> + used as prefix for sink/source names of the component. Must be a
> + unique string among multiple instances of the same component.
> + The name can be "ADX1" or "ADX2" ... "ADXx", where x depends on
> + the maximum available instances on a Tegra SoC.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description: |
> + ADX has one input and four output. Accordingly ACIF (Audio Client
You need to define the port numbers for the input and each output.
> + Interface) RX and TX port nodes are defined to represent ADX inputs
> + and output respectively. These are connected to corresponding ports
> + on AHUB.
> +
> + patternProperties:
> + '^port@[0-9]':
Per above, this will need to be split at least into input and output
ports.
Same issues in the other schemas.
> + $ref: audio-graph-port.yaml#
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> +
> + adx at 702d3800 {
> + compatible = "nvidia,tegra210-adx";
> + reg = <0x702d3800 0x100>;
> + sound-name-prefix = "ADX1";
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
> index 1118a94..4087eeb 100644
> --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml
> @@ -85,6 +85,26 @@ patternProperties:
> type: object
> $ref: nvidia,tegra186-dspk.yaml#
>
> + '^mvc@[0-9a-f]+$':
> + type: object
> + $ref: nvidia,tegra210-mvc.yaml#
> +
> + '^sfc@[0-9a-f]+$':
> + type: object
> + $ref: nvidia,tegra210-sfc.yaml#
> +
> + '^amx@[0-9a-f]+$':
> + type: object
> + $ref: nvidia,tegra210-amx.yaml#
> +
> + '^adx@[0-9a-f]+$':
> + type: object
> + $ref: nvidia,tegra210-adx.yaml#
> +
> + '^mixer@[0-9a-f]+$':
> + type: object
> + $ref: nvidia,tegra210-mixer.yaml#
> +
> required:
> - compatible
> - reg
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
> new file mode 100644
> index 0000000..e6b365b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-amx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Tegra210 AMX Device Tree Bindings
> +
> +description: |
> + The Audio Multiplexer (AMX) block can multiplex up to four input streams
> + each of which can have maximum 16 channels and generate an output stream
> + with maximum 16 channels. A byte RAM helps to form an output frame by
> + any combination of bytes from the input frames.
> +
> +maintainers:
> + - Jon Hunter <jonathanh at nvidia.com>
> + - Mohan Kumar <mkumard at nvidia.com>
> + - Sameer Pujar <spujar at nvidia.com>
> +
> +properties:
> + $nodename:
> + pattern: "^amx@[0-9a-f]*$"
> +
> + compatible:
> + oneOf:
> + - const: nvidia,tegra210-amx
> + - items:
> + - const: nvidia,tegra186-amx
> + - const: nvidia,tegra210-amx
> + - const: nvidia,tegra194-amx
> +
> + reg:
> + maxItems: 1
> +
> + sound-name-prefix:
> + pattern: "^AMX[1-9]$"
> + $ref: /schemas/types.yaml#/definitions/string
> + description:
> + used as prefix for sink/source names of the component. Must be a
> + unique string among multiple instances of the same component.
> + The name can be "AMX1" or "AMX2" ... "AMXx", where x depends on
> + the maximum available instances on a Tegra SoC.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description: |
> + AMX has four inputs and one output. Accordingly ACIF (Audio Client
> + Interfaces) RX and TX port nodes are defined to represent AMX inputs
> + and output respectively. These are connected to corresponding ports
> + on AHUB.
> +
> + patternProperties:
> + '^port@[0-9]':
> + $ref: audio-graph-port.yaml#
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> +
> + amx at 702d3000 {
> + compatible = "nvidia,tegra210-amx";
> + reg = <0x702d3000 0x100>;
> + sound-name-prefix = "AMX1";
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
> new file mode 100644
> index 0000000..0808355
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mixer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Tegra210 Mixer Device Tree Bindings
> +
> +description: |
> + The Mixer supports mixing of up to ten 7.1 audio input streams and
> + generate five outputs (each of which can be any combination of the
> + ten input streams).
> +
> +maintainers:
> + - Jon Hunter <jonathanh at nvidia.com>
> + - Mohan Kumar <mkumard at nvidia.com>
> + - Sameer Pujar <spujar at nvidia.com>
> +
> +properties:
> + $nodename:
> + pattern: "^mixer@[0-9a-f]*$"
> +
> + compatible:
> + oneOf:
> + - const: nvidia,tegra210-amixer
> + - items:
> + - enum:
> + - nvidia,tegra194-amixer
> + - nvidia,tegra186-amixer
> + - const: nvidia,tegra210-amixer
> +
> + reg:
> + maxItems: 1
> +
> + sound-name-prefix:
> + const: "MIXER"
Don't need quotes. A fixed string seems a bit pointless to put into DT.
> + $ref: /schemas/types.yaml#/definitions/string
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + description: |
> + Mixer has ten inputs and five outputs. Accordingly ACIF (Audio Client
> + Interfaces) RX and TX port nodes are defined to represent MIXER inputs
> + and outputs respectively. These are connected to corresponding ports
> + on AHUB.
> +
> + patternProperties:
> + '^port@[0-9]':
> + $ref: audio-graph-port.yaml#
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> +
> + mixer at 702dbb00 {
> + compatible = "nvidia,tegra210-amixer";
> + reg = <0x702dbb00 0x800>;
> + sound-name-prefix = "MIXER";
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
> new file mode 100644
> index 0000000..7d81b11
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mvc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Tegra210 MVC Device Tree Bindings
> +
> +description: |
> + The Master Volume Control (MVC) provides gain or attenuation to a digital
> + signal path. It can be used in input or output signal path for per-stream
> + volume control or it can be used as master volume control. The MVC block
> + has one input and one output. The input digital stream can be mono or
> + multi-channel (up to 7.1 channels) stream. An independent mute control is
> + also included in the MVC block.
> +
> +maintainers:
> + - Jon Hunter <jonathanh at nvidia.com>
> + - Mohan Kumar <mkumard at nvidia.com>
> + - Sameer Pujar <spujar at nvidia.com>
> +
> +properties:
> + $nodename:
> + pattern: "^mvc@[0-9a-f]*$"
> +
> + compatible:
> + oneOf:
> + - const: nvidia,tegra210-mvc
> + - items:
> + - enum:
> + - nvidia,tegra194-mvc
> + - nvidia,tegra186-mvc
> + - const: nvidia,tegra210-mvc
> +
> + reg:
> + maxItems: 1
> +
> + sound-name-prefix:
> + pattern: "^MVC[1-9]$"
> + $ref: /schemas/types.yaml#/definitions/string
> + description:
> + used as prefix for sink/source names of the component. Must be a
> + unique string among multiple instances of the same component.
> + The name can be "MVC1" or "MVC2" ... "MVCx", where x depends on
> + the maximum available instances on a Tegra SoC.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + properties:
> + port at 0:
> + $ref: audio-graph-port.yaml#
> + unevaluatedProperties: false
> + description: |
> + ACIF (Audio Client Interface) acting as MVC input (RX) port.
> + This is connected to corresponding ACIF port on AHUB.
> +
> + port at 1:
> + $ref: audio-graph-port.yaml#
> + unevaluatedProperties: false
> + description: |
> + ACIF (Audio Client Interface) acting as MVC output (TX) port.
> + This is connected to corresponding ACIF port on AHUB.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> +
> + mvc at 702da000 {
> + compatible = "nvidia,tegra210-mvc";
> + reg = <0x702da000 0x200>;
> + sound-name-prefix = "MVC1";
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
> new file mode 100644
> index 0000000..5f05e2a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml
> @@ -0,0 +1,76 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/nvidia,tegra210-sfc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Tegra210 SFC Device Tree Bindings
> +
> +description: |
> + The Sampling Frequency Converter (SFC) converts the sampling frequency
> + of the input signal from one frequency to another. It supports sampling
> + frequency conversions of streams of up to two channels (stereo).
> +
> +maintainers:
> + - Jon Hunter <jonathanh at nvidia.com>
> + - Mohan Kumar <mkumard at nvidia.com>
> + - Sameer Pujar <spujar at nvidia.com>
> +
> +properties:
> + $nodename:
> + pattern: "^sfc@[0-9a-f]*$"
> +
> + compatible:
> + oneOf:
> + - const: nvidia,tegra210-sfc
> + - items:
> + - enum:
> + - nvidia,tegra194-sfc
> + - nvidia,tegra186-sfc
> + - const: nvidia,tegra210-sfc
> +
> + reg:
> + maxItems: 1
> +
> + sound-name-prefix:
> + pattern: "^SFC[1-9]$"
> + $ref: /schemas/types.yaml#/definitions/string
> + description:
> + used as prefix for sink/source names of the component. Must be a
> + unique string among multiple instances of the same component.
> + The name can be "SFC1" or "SFC2" ... "SFCx", where x depends on
> + the maximum available instances on a Tegra SoC.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + properties:
> + port at 0:
> + $ref: audio-graph-port.yaml#
> + unevaluatedProperties: false
> + description: |
> + ACIF (Audio Client Interface) acting as SFC input (RX) port.
> + This is connected to corresponding ACIF port on AHUB.
> +
> + port at 1:
> + $ref: audio-graph-port.yaml#
> + unevaluatedProperties: false
> + description: |
> + ACIF (Audio Client Interface) acting as SFC output (TX) port.
> + This is connected to corresponding ACIF port on AHUB.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> +
> + sfc at 702d2000 {
> + compatible = "nvidia,tegra210-sfc";
> + reg = <0x702d2000 0x200>;
> + sound-name-prefix = "SFC1";
> + };
> +
> +...
> --
> 2.7.4
>
>
More information about the Alsa-devel
mailing list