[PATCH v2 1/2] ASoC: max98927: Handle reset gpio when probing i2c

[Andy Shevchenko]

On Mon, Aug 30, 2021 at 1:48 PM Alejandro Tafalla <atafalla at dnyon.com> wrote:
>
> Drive the reset gpio if defined in the DTS node.

...

> +       reset_gpio
> +               = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_LOW);

A bit of a strange indentation, shouldn't it be one line?

> +       if (IS_ERR(reset_gpio)) {

> +               ret = PTR_ERR(reset_gpio);
> +               return dev_err_probe(&i2c->dev, ret,
> +                       "failed to request GPIO reset pin");

It simply as

               return dev_err_probe(&i2c->dev, PTR_ERR(reset_gpio),
                       "failed to request GPIO reset pin");

> +       }

-- 
With Best Regards,
Andy Shevchenko