HDA codec problem

[Randy Dunlap]

On 8/20/21 7:11 AM, Takashi Iwai wrote:
> On Fri, 20 Aug 2021 15:54:51 +0200,
> Randy Dunlap wrote:
>>
>> On 8/19/21 11:44 PM, Takashi Iwai wrote:
>>> On Fri, 20 Aug 2021 07:08:34 +0200,
>>> Randy Dunlap wrote:
>>>>
>>>> Hi,
>>>>
>>>> I am having problems getting audio working on my computer:
>>>>
>>>> 00:1f.3 Audio device: Intel Corporation Device f1c8
>>>>
>>>> I did an internet search that said that I would need 5.13 or later to
>>>> have support for this device.
>>>
>>> The above is Cometlake-H, and it pretty much depends on the machine
>>> configuration.
>>>
>>>> openSUSE 15.3 kernel 5.3.18-59.19-default says:
>>>>
>>>> snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
>>>> snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>>>> snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>>>> snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>>>> snd_hda_codec_realtek hdaudioC0D0:    inputs:
>>>> snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
>>>> snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
>>>>
>>>> but produces no sound output.
>>>
>>> FWIW, openSUSE Leap 15.3 kernel is based on 5.3 but got tons of
>>> backports, hence its HD-audio part is almost equivalent with 5.13 or
>>> later kernel (except for the recently changed mute-LED handling --
>>> which must be irrelevant with your problem).
>>>
>>> The above indicates that the codec is detected and set up.  The rest
>>> part is often some vendor-specific quirks.  For that, details are
>>> missing completely.  At best please give alsa-info.sh output (run the
>>> script with --no-upload and attach the output).
>>>
>>
>> Oh, of course. Now attached.
> 
> I see that the Headphone mixer switch is off by some reason.
> But it should have been toggled by PulseAudio.
> 
> You can test like:
>    amixer -c0 set "Headphone" unmute

Simple mixer control 'Headphone',0
   Capabilities: pvolume pswitch
   Playback channels: Front Left - Front Right
   Limits: Playback 0 - 87
   Mono:
   Front Left: Playback 87 [100%] [0.00dB] [on]
   Front Right: Playback 87 [100%] [0.00dB] [on]


> Also, just to be sure: did you install both pulseaudio and pipewire?
> They may conflict.

Yes. pipewire is now gone.

Still no sound but I might need to restart...

Thanks!

-- 
~Randy