ASoC: sh: Add RZ/G2L SSIF-2 driver

[Biju Das]

Hi Colin,

Thanks for the report.

> Subject: re: ASoC: sh: Add RZ/G2L SSIF-2 driver
> 
> Hi,
> 
> Static analysis on linux-next with Coverity has detected an issue in
> rz_ssi_stop, sound/soc/sh/rz-ssi.c with the following commit:
> 
> commit 03e786bd43410fa93e5d2459f7a43e90ff0ae801
> Author: Biju Das <biju.das.jz at bp.renesas.com>
> Date:   Fri Aug 13 10:11:54 2021 +0100
> 
>     ASoC: sh: Add RZ/G2L SSIF-2 driver
> 
> 
> The analysis is as follows:
> 
> 367
> 368        /* Wait for idle */
> 369        timeout = 100;
> 370        while (--timeout) {
> 
> Wrong operator used (CONSTANT_EXPRESSION_RESULT)
> 
> operator_confusion: rz_ssi_reg_readl(ssi, 4) | (33554432UL /* 1UL << 25
> */) is always 1/true regardless of the values of its operand. This occurs
> as the logical operand of if.

> 
> 371                if (rz_ssi_reg_readl(ssi, SSISR) | SSISR_IIRQ)
> 372                        break;
> 373                udelay(1);
> 374        }
> 
> I suspect the & operator was intended to mask the specific bit. 
However
> I'm not sure if the intent is to detect if the SSISR_IIRQ bit should be
> zero or one at the point where the break should occur, hence I'm reporting
> this issue.

You are correct, it is supposed to be &. 
The idle condition is set by hw on the BIT(25) of this register.
So it should be &.

I will add your Reported-by tag, when I send the patch.

Thanks,
Biju