[PATCH 6/6] ASoC: Intel: bytcr_rt5640: Fix HP ElitePad 1000 G2 quirk

[Hans de Goede]

The HP Elitepad 1000 G2 has 2 headset jacks:

1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.

2. on the tablet itself, this uses the line-out of the codec, combined
with an external HP-amp + IN1 for the headset-mic.

Fix the HP ElitePad 1000 G2 to properly reflect this now that the
machine-driver supports this setup.

Note this also changes the mapping for the internal mic. from
IN1 (which was pointing to the 2nd headset-jack mic) to DMIC2
which is the actual input for the internal mics.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 7bf848a07553..32afeaf6056b 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -644,8 +644,11 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"),
 		},
-		.driver_data = (void *)(BYT_RT5640_IN1_MAP |
-					BYT_RT5640_MCLK_EN),
+		.driver_data = (void *)(BYT_RT5640_DMIC2_MAP |
+					BYT_RT5640_MCLK_EN |
+					BYT_RT5640_LINEOUT |
+					BYT_RT5640_LINEOUT_AS_HP2 |
+					BYT_RT5640_HSMIC2_ON_IN1),
 	},
 	{	/* HP Pavilion x2 10-k0XX, 10-n0XX */
 		.matches = {
-- 
2.31.1