[PATCH v1 10/14] spi: pxa2xx: Extract pxa2xx_spi_update() helper
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Fri Apr 23 18:34:33 CEST 2021
There are few places that repeat the logic of "update if changed".
Extract pxa2xx_spi_update() helper to deduplicate that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
drivers/spi/spi-pxa2xx.c | 33 ++++++++++++++-------------------
1 file changed, 14 insertions(+), 19 deletions(-)
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index f85c7439757c..4b3237f14ead 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -200,6 +200,12 @@ static bool is_mmp2_ssp(const struct driver_data *drv_data)
return drv_data->ssp_type == MMP2_SSP;
}
+static void pxa2xx_spi_update(const struct driver_data *drv_data, u32 reg, u32 mask, u32 value)
+{
+ if ((pxa2xx_spi_read(drv_data, reg) & mask) != value)
+ pxa2xx_spi_write(drv_data, reg, value & mask);
+}
+
static u32 pxa2xx_spi_get_ssrc1_change_mask(const struct driver_data *drv_data)
{
switch (drv_data->ssp_type) {
@@ -1081,19 +1087,12 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
dma_mapped ? "DMA" : "PIO");
if (is_lpss_ssp(drv_data)) {
- if ((pxa2xx_spi_read(drv_data, SSIRF) & 0xff)
- != chip->lpss_rx_threshold)
- pxa2xx_spi_write(drv_data, SSIRF,
- chip->lpss_rx_threshold);
- if ((pxa2xx_spi_read(drv_data, SSITF) & 0xffff)
- != chip->lpss_tx_threshold)
- pxa2xx_spi_write(drv_data, SSITF,
- chip->lpss_tx_threshold);
+ pxa2xx_spi_update(drv_data, SSIRF, GENMASK(7, 0), chip->lpss_rx_threshold);
+ pxa2xx_spi_update(drv_data, SSITF, GENMASK(15, 0), chip->lpss_tx_threshold);
}
- if (is_quark_x1000_ssp(drv_data) &&
- (pxa2xx_spi_read(drv_data, DDS_RATE) != chip->dds_rate))
- pxa2xx_spi_write(drv_data, DDS_RATE, chip->dds_rate);
+ if (is_quark_x1000_ssp(drv_data))
+ pxa2xx_spi_update(drv_data, DDS_RATE, GENMASK(23, 0), chip->dds_rate);
/* Stop the SSP */
if (!is_mmp2_ssp(drv_data))
@@ -1102,15 +1101,11 @@ static int pxa2xx_spi_transfer_one(struct spi_controller *controller,
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, chip->timeout);
+ /* first set CR1 without interrupt and service enables */
+ pxa2xx_spi_update(drv_data, SSCR1, change_mask, cr1);
+
/* see if we need to reload the config registers */
- if ((pxa2xx_spi_read(drv_data, SSCR0) != cr0)
- || (pxa2xx_spi_read(drv_data, SSCR1) & change_mask)
- != (cr1 & change_mask)) {
- /* first set CR1 without interrupt and service enables */
- pxa2xx_spi_write(drv_data, SSCR1, cr1 & change_mask);
- /* Update the other bits */
- pxa2xx_spi_write(drv_data, SSCR0, cr0);
- }
+ pxa2xx_spi_update(drv_data, SSCR0, GENMASK(31, 0), cr0);
/* Restart the SSP */
pxa_ssp_enable(drv_data->ssp);
--
2.30.2
More information about the Alsa-devel
mailing list