[PATCH v7 2/2] ASoC: rt715:add micmute led state control supports
Hans de Goede
hdegoede at redhat.com
Mon Apr 12 11:41:06 CEST 2021
Hi Perry,
On 4/12/21 11:19 AM, Perry Yuan wrote:
> From: Perry Yuan <perry_yuan at dell.com>
>
> Some new Dell system is going to support audio internal micphone
> privacy setting from hardware level with micmute led state changing
> When micmute hotkey pressed by user, soft mute will need to be enabled
> firstly in case of pop noise, and codec driver need to react to mic
> mute event to EC(embedded controller) notifying that SW mute is completed
> Then EC will do the hardware mute physically within the timeout reached
>
> This patch allow codec rt715 and rt715 sdca driver to change the local micmute
> led state. Dell privacy led trigger driver will ack EC when micmute key pressed
> through this micphone led control interface like hda_generic provided
> ACPI method defined in dell-privacy micmute led trigger will be called
> for notifying the EC that software mute has been completed, then hardware
> audio circuit solution controlled by EC will switch the audio input source off/on
>
> Signed-off-by: Perry Yuan <perry_yuan at dell.com>
The ALSA kernel-patch-set which I mentioned in previous discussions, which
allows controlling this through sysfs has been merged upstream and is
currently in for-nex.t. So IMHO you should use the new sysfs mechanism
for this rather then adding quirks to individual codec drivers.
Regards,
Hans
>
> --------
> v5 -> v6:
> * addresed review comments from Jaroslav
> * add quirks for micmute led control as short term solution to control
> micmute led state change
> * add comments for the invert checking
> v4 -> v5:
> * rebase to latest 5.12 rc4 upstream kernel
> v3 -> v4:
> * remove unused debug log
> * remove compile flag of DELL privacy
> * move the micmute_led to local from rt715_priv
> * when Jaroslav upstream his gerneric LED trigger driver,I will rebase
> this patch,please consider merge this at first
> https://lore.kernel.org/alsa-devel/20210211111400.1131020-1-perex@perex.cz/
> v2 -> v3:
> * simplify the patch to reuse some val value
> * add more detail to the commit info
> v1 -> v2:
> * fix some format issue
> --------
> ---
> sound/soc/codecs/rt715-sdca.c | 42 ++++++++++++++++++++++++++++++++++
> sound/soc/codecs/rt715.c | 43 +++++++++++++++++++++++++++++++++++
> 2 files changed, 85 insertions(+)
>
> diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c
> index 20528afbdc57..47dc31f7f3e3 100644
> --- a/sound/soc/codecs/rt715-sdca.c
> +++ b/sound/soc/codecs/rt715-sdca.c
> @@ -11,12 +11,14 @@
> #include <linux/moduleparam.h>
> #include <linux/kernel.h>
> #include <linux/init.h>
> +#include <linux/leds.h>
> #include <linux/pm_runtime.h>
> #include <linux/pm.h>
> #include <linux/soundwire/sdw.h>
> #include <linux/regmap.h>
> #include <linux/slab.h>
> #include <linux/platform_device.h>
> +#include <linux/dmi.h>
> #include <sound/core.h>
> #include <sound/pcm.h>
> #include <sound/pcm_params.h>
> @@ -344,6 +346,32 @@ static int rt715_sdca_get_volsw(struct snd_kcontrol *kcontrol,
> return 0;
> }
>
> +static bool micmute_led_set;
> +static int dmi_matched(const struct dmi_system_id *dmi)
> +{
> + micmute_led_set = 1;
> + return 1;
> +}
> +
> +/* Some systems will need to use this to trigger mic mute LED state changed */
> +static const struct dmi_system_id micmute_led_dmi_table[] = {
> + {
> + .callback = dmi_matched,
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"),
> + },
> + },
> + {
> + .callback = dmi_matched,
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"),
> + },
> + },
> + {},
> +};
> +
> static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol)
> {
> @@ -358,6 +386,7 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol,
> unsigned int mask = (1 << fls(max)) - 1;
> unsigned int invert = p->invert;
> int err;
> + bool micmute_led;
>
> for (i = 0; i < 4; i++) {
> if (ucontrol->value.integer.value[i] != rt715->kctl_switch_orig[i]) {
> @@ -394,6 +423,18 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol *kcontrol,
> return err;
> }
>
> + /* Micmute LED state changed by muted/unmute switch
> + * to keep syncing with actual hardware mic mute led state
> + * invert will be checked to change the state switch
> + */
> + if (invert && micmute_led_set) {
> + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1])
> + micmute_led = LED_OFF;
> + else
> + micmute_led = LED_ON;
> + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led);
> + }
> +
> return k_changed;
> }
>
> @@ -1066,6 +1107,7 @@ int rt715_sdca_io_init(struct device *dev, struct sdw_slave *slave)
>
> pm_runtime_mark_last_busy(&slave->dev);
> pm_runtime_put_autosuspend(&slave->dev);
> + dmi_check_system(micmute_led_dmi_table);
>
> return 0;
> }
> diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c
> index 34c3357e943b..59d05b28f52e 100644
> --- a/sound/soc/codecs/rt715.c
> +++ b/sound/soc/codecs/rt715.c
> @@ -13,6 +13,7 @@
> #include <linux/init.h>
> #include <linux/delay.h>
> #include <linux/i2c.h>
> +#include <linux/leds.h>
> #include <linux/pm_runtime.h>
> #include <linux/pm.h>
> #include <linux/soundwire/sdw.h>
> @@ -25,6 +26,7 @@
> #include <linux/of.h>
> #include <linux/of_gpio.h>
> #include <linux/of_device.h>
> +#include <linux/dmi.h>
> #include <sound/core.h>
> #include <sound/pcm.h>
> #include <sound/pcm_params.h>
> @@ -70,6 +72,32 @@ static void rt715_get_gain(struct rt715_priv *rt715, unsigned int addr_h,
> pr_err("Failed to get L channel gain.\n");
> }
>
> +static bool micmute_led_set;
> +static int dmi_matched(const struct dmi_system_id *dmi)
> +{
> + micmute_led_set = 1;
> + return 1;
> +}
> +
> +/* Some systems will need to use this to trigger mic mute LED state changed */
> +static const struct dmi_system_id micmute_led_dmi_table[] = {
> + {
> + .callback = dmi_matched,
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> + DMI_MATCH(DMI_PRODUCT_SKU, "0A32"),
> + },
> + },
> + {
> + .callback = dmi_matched,
> + .matches = {
> + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
> + DMI_MATCH(DMI_PRODUCT_SKU, "0A3E"),
> + },
> + },
> + {},
> +};
> +
> /* For Verb-Set Amplifier Gain (Verb ID = 3h) */
> static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol,
> struct snd_ctl_elem_value *ucontrol)
> @@ -88,6 +116,7 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol,
> RT715_SET_GAIN_MIX_ADC2_L};
> unsigned int addr_h, addr_l, val_h, val_ll, val_lr;
> unsigned int read_ll, read_rl, i, j, loop_cnt;
> + bool micmute_led;
>
> if (strstr(ucontrol->id.name, "Main Capture Switch") ||
> strstr(ucontrol->id.name, "Main Capture Volume"))
> @@ -185,6 +214,19 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol *kcontrol,
> if (dapm->bias_level <= SND_SOC_BIAS_STANDBY)
> regmap_write(rt715->regmap,
> RT715_SET_AUDIO_POWER_STATE, AC_PWRST_D3);
> +
> + /* Micmute LED state changed by muted/unmute switch
> + * to keep syncing with actual hardware mic mute led state
> + * invert will be checked to change the state switch
> + */
> + if (mc->invert && micmute_led_set) {
> + if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1])
> + micmute_led = LED_OFF;
> + else
> + micmute_led = LED_ON;
> + ledtrig_audio_set(LED_AUDIO_MICMUTE, micmute_led);
> + }
> +
> return 0;
> }
>
> @@ -901,6 +943,7 @@ int rt715_io_init(struct device *dev, struct sdw_slave *slave)
>
> pm_runtime_mark_last_busy(&slave->dev);
> pm_runtime_put_autosuspend(&slave->dev);
> + dmi_check_system(micmute_led_dmi_table);
>
> return 0;
> }
>
More information about the Alsa-devel
mailing list