[PATCH] ASoC: rt1011: remove pack_id check in rt1011
Jack Yu
jack.yu at realtek.com
Thu Apr 8 10:32:40 CEST 2021
For latest design, different package could use the same setting,
therefore the check of pack_id will no longer be used.
Signed-off-by: Jack Yu <jack.yu at realtek.com>
---
sound/soc/codecs/rt1011.c | 16 ++--------------
sound/soc/codecs/rt1011.h | 1 -
2 files changed, 2 insertions(+), 15 deletions(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index 238cb66f4c6a..faff2b558687 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -2236,18 +2236,9 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
dc_offset |= (value & 0xffff);
dev_info(dev, "Gain1 offset=0x%x\n", dc_offset);
- /* check the package info. */
- regmap_read(rt1011->regmap, RT1011_EFUSE_MATCH_DONE, &value);
- if (value & 0x4)
- rt1011->pack_id = 1;
-
if (cali_flag) {
- if (rt1011->pack_id)
- regmap_write(rt1011->regmap, RT1011_ADC_SET_1, 0x292c);
- else
- regmap_write(rt1011->regmap, RT1011_ADC_SET_1, 0x2925);
-
+ regmap_write(rt1011->regmap, RT1011_ADC_SET_1, 0x2925);
/* Class D on */
regmap_write(rt1011->regmap, RT1011_CLASS_D_POS, 0x010e);
regmap_write(rt1011->regmap,
@@ -2373,10 +2364,7 @@ static void rt1011_calibration_work(struct work_struct *work)
rt1011_r0_load(rt1011);
}
- if (rt1011->pack_id)
- snd_soc_component_write(component, RT1011_ADC_SET_1, 0x292c);
- else
- snd_soc_component_write(component, RT1011_ADC_SET_1, 0x2925);
+ snd_soc_component_write(component, RT1011_ADC_SET_1, 0x2925);
}
static int rt1011_parse_dp(struct rt1011_priv *rt1011, struct device *dev)
diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h
index f3a9a96640f1..68fadc15fa8c 100644
--- a/sound/soc/codecs/rt1011.h
+++ b/sound/soc/codecs/rt1011.h
@@ -692,7 +692,6 @@ struct rt1011_priv {
unsigned int r0_reg, cali_done;
unsigned int r0_calib, temperature_calib;
int recv_spk_mode;
- unsigned int pack_id; /* 0: WLCSP; 1: QFN */
};
#endif /* end of _RT1011_H_ */
--
2.29.0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: winmail.dat
Type: application/ms-tnef
Size: 6345 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20210408/da939795/attachment-0001.bin>
More information about the Alsa-devel
mailing list