[PATCH] soundwire: qcom: cleanup internal port config indexing

[Vinod Koul]

On 01-04-21, 10:24, Srinivas Kandagatla wrote:
> Internally used portconfig array for storing port bandwidth
> params starts from offset zero. However port zero is not really
> used and we also copy the bus parameters to offset zero.
> So basically we endup with a code which has to subtract 1 from port
> number to get to port parameters.
> 
> This is bit confusing to the reader so, make this bit more obvious by only
> copying the parameters to offset 1 instead of zero. This will avoid doing
> -1 every time when we try to get port params.
> 
> Similar thing has been recently done with din/dout_port_mask.

Applied, thanks

-- 
~Vinod