[PATCH v4 09/22] arm64: dts: allwinner: h6: Add HDMI audio node

[Clément Péron]

Hi Maxime,

On Mon, 28 Sep 2020 at 10:43, Maxime Ripard <maxime at cerno.tech> wrote:
>
> On Mon, Sep 21, 2020 at 08:37:09PM +0200, Jernej Škrabec wrote:
> > Dne ponedeljek, 21. september 2020 ob 19:23:49 CEST je Clément Péron
> > napisal(a):
> > > Hi Maxime,
> > >
> > > On Mon, 21 Sep 2020 at 15:59, Maxime Ripard <maxime at cerno.tech> wrote:
> > > >
> > > > On Mon, Sep 21, 2020 at 12:27:18PM +0200, Clément Péron wrote:
> > > > > From: Jernej Skrabec <jernej.skrabec at siol.net>
> > > > >
> > > > > Add a simple-soundcard to link audio between HDMI and I2S.
> > > > >
> > > > > Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> > > > > Signed-off-by: Marcus Cooper <codekipper at gmail.com>
> > > > > Signed-off-by: Clément Péron <peron.clem at gmail.com>
> > > > > ---
> > > > >  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++
> > > > >  1 file changed, 33 insertions(+)
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/
> > boot/dts/allwinner/sun50i-h6.dtsi
> > > > > index 28c77d6872f6..a8853ee7885a 100644
> > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > > > @@ -67,6 +67,25 @@ de: display-engine {
> > > > >               status = "disabled";
> > > > >       };
> > > > >
> > > > > +     hdmi_sound: hdmi-sound {
> > > > > +             compatible = "simple-audio-card";
> > > > > +             simple-audio-card,format = "i2s";
> > > > > +             simple-audio-card,name = "sun50i-h6-hdmi";
> > > > > +             simple-audio-card,mclk-fs = <128>;
> > > > > +             simple-audio-card,frame-inversion;
> > > > > +             status = "disabled";
> > > > > +
> > > > > +             simple-audio-card,codec {
> > > > > +                     sound-dai = <&hdmi>;
> > > > > +             };
> > > > > +
> > > > > +             simple-audio-card,cpu {
> > > > > +                     sound-dai = <&i2s1>;
> > > > > +                     dai-tdm-slot-num = <2>;
> > > > > +                     dai-tdm-slot-width = <32>;
> > > >
> > > > It looks weird to have both some TDM setup here, and yet the format in
> > > > i2s?
> > >
> > > Yes, I agree I will check if it's really needed.
> >
> > I think this was explained before.
>
> Possibly, but this should be in a comment or at least the commit log
>
> > Anyway, this is needed to force width to 32, no matter actual sample
> > width. That's a requirement of HDMI codec. I believe Marcus Cooper
> > have another codec which also needs fixed width.
> >
> > There is no similar property for I2S, so TDM one is used here.
>
> Except it's really dedicated to the TDM mode and doesn't really make
> much sense here.
>
> If we have special requirements like this on the codec setup, that
> sounds like a good justification for creating a custom codec instead of
> shoehorning it into simple-card

When all the remarks are fixed would it be possible to merge the rest
of the series without the dts changes ?

I will propose another series to introduce a dedicated codec for that.

>
> Maxime