[PATCH 2/2] ASoC: tas2562: Add the TAS2110 class-D amplifier
Dan Murphy
dmurphy at ti.com
Mon Sep 21 17:38:20 CEST 2020
Add the TAS2110 amplifier to the TAS2562 driver. The TAS2110 is register
and bitmap compatible. The chips differ in that the TAS2110 does not
have the I/V Sense feedback path. Since these features do not exist the
device needs to be registered without these controls.
Signed-off-by: Dan Murphy <dmurphy at ti.com>
---
This patchset is based on top of patchset https://lore.kernel.org/patchwork/project/lkml/list/?series=463709
sound/soc/codecs/tas2562.c | 48 ++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c
index 56d410141ee0..da820e8d59a1 100644
--- a/sound/soc/codecs/tas2562.c
+++ b/sound/soc/codecs/tas2562.c
@@ -53,12 +53,14 @@ struct tas2562_data {
int v_sense_slot;
int i_sense_slot;
int volume_lvl;
+ int model_id;
};
enum tas256x_model {
TAS2562,
TAS2563,
TAS2564,
+ TAS2110,
};
static int tas2562_set_bias_level(struct snd_soc_component *component,
@@ -569,6 +571,40 @@ static const struct snd_kcontrol_new tas2562_snd_controls[] = {
},
};
+static const struct snd_soc_dapm_widget tas2110_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_IN("ASI1", "ASI1 Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_MUX("ASI1 Sel", SND_SOC_NOPM, 0, 0, &tas2562_asi1_mux),
+ SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas2562_dac_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_OUTPUT("OUT"),
+};
+
+static const struct snd_soc_dapm_route tas2110_audio_map[] = {
+ {"ASI1 Sel", "I2C offset", "ASI1"},
+ {"ASI1 Sel", "Left", "ASI1"},
+ {"ASI1 Sel", "Right", "ASI1"},
+ {"ASI1 Sel", "LeftRightDiv2", "ASI1"},
+ { "DAC", NULL, "ASI1 Sel" },
+ { "OUT", NULL, "DAC" },
+};
+
+static const struct snd_soc_component_driver soc_component_dev_tas2110 = {
+ .probe = tas2562_codec_probe,
+ .suspend = tas2562_suspend,
+ .resume = tas2562_resume,
+ .set_bias_level = tas2562_set_bias_level,
+ .controls = tas2562_snd_controls,
+ .num_controls = ARRAY_SIZE(tas2562_snd_controls),
+ .dapm_widgets = tas2110_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(tas2110_dapm_widgets),
+ .dapm_routes = tas2110_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(tas2110_audio_map),
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
+};
+
static const struct snd_soc_dapm_widget tas2562_dapm_widgets[] = {
SND_SOC_DAPM_AIF_IN("ASI1", "ASI1 Playback", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_MUX("ASI1 Sel", SND_SOC_NOPM, 0, 0, &tas2562_asi1_mux),
@@ -703,6 +739,9 @@ static int tas2562_parse_dt(struct tas2562_data *tas2562)
tas2562->sdz_gpio = NULL;
}
+ if (tas2562->model_id == TAS2110)
+ return ret;
+
ret = fwnode_property_read_u32(dev->fwnode, "ti,imon-slot-no",
&tas2562->i_sense_slot);
if (ret) {
@@ -741,6 +780,7 @@ static int tas2562_probe(struct i2c_client *client,
data->client = client;
data->dev = &client->dev;
+ data->model_id = id->driver_data;
tas2562_parse_dt(data);
@@ -753,6 +793,12 @@ static int tas2562_probe(struct i2c_client *client,
dev_set_drvdata(&client->dev, data);
+ if (data->model_id == TAS2110)
+ return devm_snd_soc_register_component(dev,
+ &soc_component_dev_tas2110,
+ tas2562_dai,
+ ARRAY_SIZE(tas2562_dai));
+
return devm_snd_soc_register_component(dev, &soc_component_dev_tas2562,
tas2562_dai,
ARRAY_SIZE(tas2562_dai));
@@ -763,6 +809,7 @@ static const struct i2c_device_id tas2562_id[] = {
{ "tas2562", TAS2562 },
{ "tas2563", TAS2563 },
{ "tas2564", TAS2564 },
+ { "tas2110", TAS2110 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tas2562_id);
@@ -771,6 +818,7 @@ static const struct of_device_id tas2562_of_match[] = {
{ .compatible = "ti,tas2562", },
{ .compatible = "ti,tas2563", },
{ .compatible = "ti,tas2564", },
+ { .compatible = "ti,tas2110", },
{ },
};
MODULE_DEVICE_TABLE(of, tas2562_of_match);
--
2.28.0
More information about the Alsa-devel
mailing list