[PATCH v7 2/3] ASoC: qcom: dt-bindings: Add sc7180 machine bindings

Rob Herring robh at kernel.org
Wed Sep 9 19:49:22 CEST 2020


On Wed, Sep 9, 2020 at 3:24 AM Cheng-yi Chiang <cychiang at chromium.org> wrote:
>
> On Wed, Sep 9, 2020 at 4:34 AM Rob Herring <robh at kernel.org> wrote:
> >
> > On Mon, Sep 07, 2020 at 06:00:38PM +0800, Cheng-Yi Chiang wrote:
> > > Add devicetree bindings documentation file for sc7180 sound card.
> > >
> > > Signed-off-by: Cheng-Yi Chiang <cychiang at chromium.org>
> > > ---
> > >  .../bindings/sound/qcom,sc7180.yaml           | 143 ++++++++++++++++++
> > >  1 file changed, 143 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> > > new file mode 100644
> > > index 000000000000..ae809346ca80
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> > > @@ -0,0 +1,143 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/sound/qcom,sc7180.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Qualcomm Technologies Inc. SC7180 ASoC sound card driver
> > > +
> > > +maintainers:
> > > +  - Rohit kumar <rohitkr at codeaurora.org>
> > > +  - Cheng-Yi Chiang <cychiang at chromium.org>
> > > +
> > > +description:
> > > +  This binding describes the SC7180 sound card which uses LPASS for audio.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: qcom,sc7180-sndcard
> > > +
> > > +  audio-routing:
> > > +    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
> > > +    description:
> > > +      A list of the connections between audio components. Each entry is a
> > > +      pair of strings, the first being the connection's sink, the second
> > > +      being the connection's source.
> > > +
> > > +  model:
> > > +    $ref: /schemas/types.yaml#/definitions/string
> > > +    description: User specified audio sound card name
> > > +
> > > +  headset-jack:
> > > +    $ref: /schemas/types.yaml#/definitions/phandle
> > > +    description: phandle of the codec for headset detection
> > > +
> > > +  hdmi-jack:
> > > +    $ref: /schemas/types.yaml#/definitions/phandle
> > > +    description: phandle of the codec for hdmi jack detection
> >
> > You already have links to these devices. Why duplicate it here?
> >
> > What if you had 2 headsets? This doesn't scale.
> >
> Hi Rob, thanks for reviewing.
> There was some discussion in
> https://patchwork.kernel.org/patch/11737905/#23571643 about how to
> specify the dailink that has a headset jack.
> I would like to pass the information of headset jack and hdmi jack to
> the machine driver so the machine driver can call
> snd_soc_component_set_jack to set jack when init the corresponding link.
> Headset jack and hdmi jack will be treated differently for button and
> event type.
> Because of this, we can not just set a property "jack" in the link.

Don't design your binding around some driver architecture. Limitations
of ASoC are not reasons for your binding.

For DP and HDMI, we assume HPD is supported generally as that's a
standard function for HDMI/DP controllers. There's a 'no-hpd' property
for cases of broken HPD. That hardware description is part of the
device HPD is connected to which is the HDMI/DP controller/bridge or
the connector node in the case of a GPIO line. That doesn't belong in
the virtual sound card.

I would assume a codec to be similar. The codec node (the alc5682
node) should have any jack related properties (or possibly implicitly
support it by default).

> As for the 2 headsets case (I guess you mean hp jack and mic jack), on
> this board we will not have this use case.
> If someone really wants to build hp jack and mic jack on the board
> based on this machine driver, we can add two more property hp-jack and
> mic-jack to specify that,
> as the machine driver will need to know the different jack types
> anyway. What do you think ?

I was thinking more of a case of having 2 of the same thing. Perhaps 2
HDMI outputs. Or if you have DP instead of HDMI? Just going to add
'dp-jack'?

Rob


More information about the Alsa-devel mailing list