[PATCH v2 1/7] ASoC/soundwire: bus: use property to set interrupt masks

Bard Liao yung-chuan.liao at linux.intel.com
Tue Sep 8 15:45:15 CEST 2020


From: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>

Add a slave-level property and program the SCP_INT1_MASK as desired by
the codec driver. Since there is no DisCo property this has to be an
implementation-specific firmware property or hard-coded in the driver.

The only functionality change is that implementation-defined
interrupts are no longer set for amplifiers - those interrupts are
typically for jack detection or acoustic event detection/hotwording.

Tested-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen at linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski at linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao at linux.intel.com>
---
 drivers/soundwire/bus.c         | 12 ++++++------
 include/linux/soundwire/sdw.h   |  2 ++
 sound/soc/codecs/max98373-sdw.c |  3 +++
 sound/soc/codecs/rt1308-sdw.c   |  2 ++
 sound/soc/codecs/rt5682-sdw.c   |  4 ++++
 sound/soc/codecs/rt700-sdw.c    |  4 ++++
 sound/soc/codecs/rt711-sdw.c    |  4 ++++
 sound/soc/codecs/rt715-sdw.c    |  4 ++++
 sound/soc/codecs/wsa881x.c      |  1 +
 9 files changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index d808f0256ba0..9f4cc24ccea3 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1184,13 +1184,13 @@ static int sdw_initialize_slave(struct sdw_slave *slave)
 		return ret;
 
 	/*
-	 * Set bus clash, parity and SCP implementation
-	 * defined interrupt mask
-	 * TODO: Read implementation defined interrupt mask
-	 * from Slave property
+	 * Set SCP_INT1_MASK register, typically bus clash and
+	 * implementation-defined interrupt mask. The Parity detection
+	 * may not always be correct on startup so its use is
+	 * device-dependent, it might e.g. only be enabled in
+	 * steady-state after a couple of frames.
 	 */
-	val = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
-					SDW_SCP_INT1_PARITY;
+	val = slave->prop.scp_int1_mask;
 
 	/* Enable SCP interrupts */
 	ret = sdw_update(slave, SDW_SCP_INTMASK1, val, val);
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 1e9010c139f0..9d94cdf6346f 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -357,6 +357,7 @@ struct sdw_dpn_prop {
  * @dp0_prop: Data Port 0 properties
  * @src_dpn_prop: Source Data Port N properties
  * @sink_dpn_prop: Sink Data Port N properties
+ * @scp_int1_mask: SCP_INT1_MASK desired settings
  */
 struct sdw_slave_prop {
 	u32 mipi_revision;
@@ -378,6 +379,7 @@ struct sdw_slave_prop {
 	struct sdw_dp0_prop *dp0_prop;
 	struct sdw_dpn_prop *src_dpn_prop;
 	struct sdw_dpn_prop *sink_dpn_prop;
+	u8 scp_int1_mask;
 };
 
 /**
diff --git a/sound/soc/codecs/max98373-sdw.c b/sound/soc/codecs/max98373-sdw.c
index a3ec92775ea7..76ddde509a08 100644
--- a/sound/soc/codecs/max98373-sdw.c
+++ b/sound/soc/codecs/max98373-sdw.c
@@ -15,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/soundwire/sdw.h>
 #include <linux/soundwire/sdw_type.h>
+#include <linux/soundwire/sdw_registers.h>
 #include "max98373.h"
 #include "max98373-sdw.h"
 
@@ -287,6 +288,8 @@ static int max98373_read_prop(struct sdw_slave *slave)
 	unsigned long addr;
 	struct sdw_dpn_prop *dpn;
 
+	prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+
 	/* BITMAP: 00001000  Dataport 3 is active */
 	prop->source_ports = BIT(3);
 	/* BITMAP: 00000010  Dataport 1 is active */
diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c
index 09c69dbab12a..e02b325240df 100644
--- a/sound/soc/codecs/rt1308-sdw.c
+++ b/sound/soc/codecs/rt1308-sdw.c
@@ -123,6 +123,8 @@ static int rt1308_read_prop(struct sdw_slave *slave)
 	unsigned long addr;
 	struct sdw_dpn_prop *dpn;
 
+	prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
+
 	prop->paging_support = true;
 
 	/* first we need to allocate memory for set bits in port lists */
diff --git a/sound/soc/codecs/rt5682-sdw.c b/sound/soc/codecs/rt5682-sdw.c
index b7c97aba7f17..8d4ea46bc6b5 100644
--- a/sound/soc/codecs/rt5682-sdw.c
+++ b/sound/soc/codecs/rt5682-sdw.c
@@ -19,6 +19,7 @@
 #include <linux/mutex.h>
 #include <linux/soundwire/sdw.h>
 #include <linux/soundwire/sdw_type.h>
+#include <linux/soundwire/sdw_registers.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -542,6 +543,9 @@ static int rt5682_read_prop(struct sdw_slave *slave)
 	unsigned long addr;
 	struct sdw_dpn_prop *dpn;
 
+	prop->scp_int1_mask = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
+		SDW_SCP_INT1_PARITY;
+
 	prop->paging_support = false;
 
 	/* first we need to allocate memory for set bits in port lists */
diff --git a/sound/soc/codecs/rt700-sdw.c b/sound/soc/codecs/rt700-sdw.c
index b19fbcc12c69..8d9678d1f3c7 100644
--- a/sound/soc/codecs/rt700-sdw.c
+++ b/sound/soc/codecs/rt700-sdw.c
@@ -11,6 +11,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/soundwire/sdw.h>
 #include <linux/soundwire/sdw_type.h>
+#include <linux/soundwire/sdw_registers.h>
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <sound/soc.h>
@@ -338,6 +339,9 @@ static int rt700_read_prop(struct sdw_slave *slave)
 	unsigned long addr;
 	struct sdw_dpn_prop *dpn;
 
+	prop->scp_int1_mask = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
+		SDW_SCP_INT1_PARITY;
+
 	prop->paging_support = false;
 
 	/* first we need to allocate memory for set bits in port lists */
diff --git a/sound/soc/codecs/rt711-sdw.c b/sound/soc/codecs/rt711-sdw.c
index dc4a2b482462..d4b3d7716cac 100644
--- a/sound/soc/codecs/rt711-sdw.c
+++ b/sound/soc/codecs/rt711-sdw.c
@@ -11,6 +11,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/soundwire/sdw.h>
 #include <linux/soundwire/sdw_type.h>
+#include <linux/soundwire/sdw_registers.h>
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <sound/soc.h>
@@ -342,6 +343,9 @@ static int rt711_read_prop(struct sdw_slave *slave)
 	unsigned long addr;
 	struct sdw_dpn_prop *dpn;
 
+	prop->scp_int1_mask = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
+		SDW_SCP_INT1_PARITY;
+
 	prop->paging_support = false;
 
 	/* first we need to allocate memory for set bits in port lists */
diff --git a/sound/soc/codecs/rt715-sdw.c b/sound/soc/codecs/rt715-sdw.c
index d8ed07305ffc..0e5c75f85926 100644
--- a/sound/soc/codecs/rt715-sdw.c
+++ b/sound/soc/codecs/rt715-sdw.c
@@ -12,6 +12,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/soundwire/sdw.h>
 #include <linux/soundwire/sdw_type.h>
+#include <linux/soundwire/sdw_registers.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/regmap.h>
@@ -436,6 +437,9 @@ static int rt715_read_prop(struct sdw_slave *slave)
 	unsigned long addr;
 	struct sdw_dpn_prop *dpn;
 
+	prop->scp_int1_mask = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH |
+		SDW_SCP_INT1_PARITY;
+
 	prop->paging_support = false;
 
 	/* first we need to allocate memory for set bits in port lists */
diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
index d39d479e2378..68e774e69c85 100644
--- a/sound/soc/codecs/wsa881x.c
+++ b/sound/soc/codecs/wsa881x.c
@@ -1112,6 +1112,7 @@ static int wsa881x_probe(struct sdw_slave *pdev,
 	wsa881x->sconfig.type = SDW_STREAM_PDM;
 	pdev->prop.sink_ports = GENMASK(WSA881X_MAX_SWR_PORTS, 0);
 	pdev->prop.sink_dpn_prop = wsa_sink_dpn_prop;
+	pdev->prop.scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
 	gpiod_direction_output(wsa881x->sd_n, 1);
 
 	wsa881x->regmap = devm_regmap_init_sdw(pdev, &wsa881x_regmap_config);
-- 
2.17.1



More information about the Alsa-devel mailing list