[PATCH V3] ASoC: Intel: boards: Use FS as nau8825 sysclk in nau88125_* machine

[Pierre-Louis Bossart]

Sorry, I couldn't resist adding three more comments to improve further:

> -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream,
> -	struct snd_pcm_hw_params *params)
> +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd)
>   {
>   	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_pcm_runtime *runtime = substream->runtime;
>   	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> -	int ret;
> -
> -	ret = snd_soc_dai_set_sysclk(codec_dai,
> -			NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN);
> +	int ret = 0;
>   
> -	if (ret < 0)
> -		dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret);
> +	switch (cmd) {
> +	case SNDRV_PCM_TRIGGER_START:
> +		ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0,
> +					     SND_SOC_CLOCK_IN);

Maybe a simple comment to explain what this does?

> +		if (ret < 0) {
> +			dev_err(codec_dai->dev, "can't set FS clock %d\n", ret);
> +			break;
> +		}
> +		ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate,
> +					  runtime->rate * 256);
> +		if (ret < 0)
> +			dev_err(codec_dai->dev, "can't set FLL: %d\n", ret);
> +		break;

You could replace this by a /* fallthrough */ statement?

> +	case SNDRV_PCM_TRIGGER_RESUME:
> +		ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate,
> +					  runtime->rate * 256);
> +		if (ret < 0)
> +			dev_err(codec_dai->dev, "can't set FLL: %d\n", ret);
> +		break;
> +	}

> +static int __maybe_unused skylake_nau8825_resume_post(struct snd_soc_card *card)
> +{
> +	struct snd_soc_dai *codec_dai;
> +
> +	codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI);
> +	if (!codec_dai) {
> +		dev_err(card->dev, "Codec dai not found\n");
> +		return -EIO;
> +	}
> +
> +	dev_dbg(codec_dai->dev, "playback_active:%d playback_widget->active:%d codec_dai->rate:%d\n",
> +		codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK],
> +		codec_dai->playback_widget->active,
> +		codec_dai->rate);
> +
> +	if (codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK] &&
> +	    codec_dai->playback_widget->active)
> +		snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0,
> +				       SND_SOC_CLOCK_IN);

And that part is also worthy of a comment, e.g. why not do this as part 
of the TRIGGER_RESUME and why only for playback?


> --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c
> +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c

same comments for this other machine driver.