[PATCH 1/7] soundwire: bus: use property to set interrupt masks

[Jaroslav Kysela]

Dne 28. 08. 20 v 8:51 Vinod Koul napsal(a):
> Hi Mark,
> 
> On 18-08-20, 22:06, Bard Liao wrote:
>> From: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
>>
>> Add a slave-level property and program the SCP_INT1_MASK as desired by
>> the codec driver. Since there is no DisCo property this has to be an
>> implementation-specific firmware property or hard-coded in the driver.
>>
>> The only functionality change is that implementation-defined
>> interrupts are no longer set for amplifiers - those interrupts are
>> typically for jack detection or acoustic event detection/hotwording.
>>
>> Tested-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
>> Reviewed-by: Kai Vehmanen <kai.vehmanen at linux.intel.com>
>> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski at linux.intel.com>
>> Signed-off-by: Bard Liao <yung-chuan.liao at linux.intel.com>
>> ---
>>  drivers/soundwire/bus.c         | 12 ++++++------
>>  include/linux/soundwire/sdw.h   |  2 ++
>>  sound/soc/codecs/max98373-sdw.c |  3 +++
>>  sound/soc/codecs/rt1308-sdw.c   |  2 ++
>>  sound/soc/codecs/rt5682-sdw.c   |  4 ++++
>>  sound/soc/codecs/rt700-sdw.c    |  4 ++++
>>  sound/soc/codecs/rt711-sdw.c    |  4 ++++
>>  sound/soc/codecs/rt715-sdw.c    |  4 ++++
>>  sound/soc/codecs/wsa881x.c      |  1 +
> 
> This touches codecs, can you Ack it please

Mark, could you ack the ASoC change to accept this patch via the soundwire repo?

> 
> Ideally this should have been split up to header, the codec updates and
> finally the bus change!

I don't think that the split is ideal in this case. I tested the code and it
looks straight enough.

Acked-by: Jaroslav Kysela <perex at perex.cz>

-- 
Jaroslav Kysela <perex at perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.